Four-Point Contact Ball Bearings
Four point contact ball bearingsare radial single row angular contact ball bearings with raceways that are designed to support axial loads in both directions. For a given axial load, a limited radial load can also be supported (Load ratio). The bearings are separable, i.e. the outer ring with ball and cage assembly can be mounted separately from the two inner ring halves.
Both inner ring halves of VXO Explorer four point contact bearings have a recessed shoulder. This improves oil flow when the bearing is used in combination with an VXO cylindrical roller bearing (fig. 1). In addition, these recesses can be used to facilitate dismounting.
Features of 4 point contact ball bearing
Accommodates axial loads in both directions
Less axial space
These bearings take up considerably less axial space than double row bearings.
High load carrying capacity
A large number of balls are incorporated, giving the bearing its high load carrying capacity.
Separable design
The split inner ring leads to easier mounting and dismounting of the bearing.
Improved oil flow
Limited inner ring deformation when subjected to high clamping forces
Specification of Four-Point Contact Ball Bearings
|
Dimensions |
Basic load rating |
||||
|
Designations(seals) |
d |
D |
B |
C |
C0 |
|
3200 A-2RS1 |
10 |
30 |
14,3 |
||
|
3201 A-2RS1 |
12 |
32 |
15,9 |
||
|
3202 A-2RS1 |
15 |
35 |
15,9 |
||
|
3302 A-2RS1 |
15 |
42 |
19 |
||
|
3203 A-2RS1 |
17 |
40 |
17,5 |
||
|
3303 A-2RS1 |
17 |
47 |
22,2 |
||
|
20 |
47 |
20,6 |
|||
|
*3204 A-2RS1 |
20 |
47 |
20,6 |
||
|
20 |
52 |
22,2 |
|||
|
*3304 A-2RS1 |
20 |
52 |
22,2 |
||
|
25 |
52 |
20,6 |
|||
|
*3205 A-2RS1 |
25 |
52 |
20,6 |
||
|
25 |
62 |
25,4 |
|||
|
*3305 A-2RS1 |
30 |
62 |
25,4 |
||
|
30 |
62 |
23,8 |
|||
|
*3206 A-2RS1 |
30 |
62 |
23,8 |
||
|
30 |
72 |
30,2 |
|||
|
*3306 A-2RS1 |
30 |
72 |
30,2 |
||
|
35 |
72 |
27 |
|||
|
*3207 A-2RS1 |
35 |
72 |
27 |
||
|
35 |
80 |
34,9 |
|||
|
*3307 A-2RS1 |
35 |
80 |
34,9 |
||
|
40 |
80 |
30,2 |
|||
|
*3208 A-2RS1 |
40 |
80 |
30,2 |
||
|
40 |
90 |
36,5 |
|||
|
*3308 A-2RS1 |
40 |
90 |
36,5 |
||
|
45 |
85 |
30,2 |
|||
|
*3209 A-2RS1 |
45 |
85 |
30,2 |
||
|
45 |
100 |
39,7 |
72 |
||
|
*3309 A-2RS1 |
45 |
100 |
39,7 |
72 |
|
|
50 |
110 |
44,4 |
|||
|
*3310 A-2RS1 |
50 |
110 |
44,4 |
||
|
55 |
100 |
33,3 |
|||
|
*3211 A-2RS1 |
55 |
100 |
33,3 |
||
|
55 |
120 |
49,2 |
|||
|
*3311 A-2RS1 |
55 |
120 |
49,2 |
||
|
60 |
110 |
36,5 |
|||
|
*3212 A-2RS1 |
60 |
110 |
36,5 |
||
|
60 |
130 |
54 |
|||
|
*3312 A-2Z |
60 |
130 |
54 |
||
|
3212 A-2RS1 |
65 |
120 |
38,1 |
||
|
*3313 A-2Z |
65 |
140 |
58,7 |
||
|
3214 A-2Z |
70 |
125 |
39,7 |
||
|
*3314 A-2Z |
70 |
150 |
63,5 |
120 |
|
|
3215 A-2Z |
75 |
130 |
41,3 |
||
|
*3315 A-2Z |
75 |
160 |
68,3 |
||
As a linear motion manufacturer, we can offer kinds of linear motion systemsparts for sale, if you are interested, please leave us a message.
在线联系供应商
Other supplier products
 |
Single Nut with M-thread | The Cylindrical type with M-thread at the Nut end. The nut should be mounted using M-threaded nut. It is suitable for mounting with cylinder. High... |
 |
Linear Motion Guideways | The coefficient of friction on a linear guideway is only 1/50 compared to a traditional slide and they are able to take loads in all directions. Wi... |
 |
Ball Screw Nut Assembly | Ball Screw Nut Assembly The ball screw&nut assemblyconsists of a screw and a nut, each with matching helical grooves, and balls which roll bet... |
 |
Ball Nut | Miniature Metric Precision Ball Screws are an efficient and cost-effective solution in a small envelope, ideal for use in small spaces. Ball screw ... |
 |
Trapezoidal Thread (DIN103) | Leadscrews are an excellent and reliable way of converting rotary motion into a linear motion. Application criteria such as speed, load and the acc... |
