Trial-Run Molding
A mould trialis a process by which a new mould is optimised in order to produce the desired products as efficiently as possible. This makes it one of the most important aspects of injection moulding.
DETAIL OF TRIAL MOLDING
Trial Molding Process
Set barrel temperature according to recommendations from the material supplier. Middle of recommended in front and lower end of recommended in back, if don’t have date sheet, reference from mold flow report. Record actual melt temp with air shot method. If the customer is to attend the trial, the material data sheet should be printed and present at the machine.
Set mould temperature to the middle of recommended temp span, if don’t have date sheet, reference from mold flow report. Also, make sure the actual mould temp is right during production.
Set clamping force according to Moldflow report, or max clamp of customer specified machine.
Set holding pressure to 0 at first.
Increase the shot size gradually until parts are ~90% full. Check cavity variation. If more than 7% cavity variation, write down in page and mark as the issue needs to improve
Increase the shot size until parts are 100% full, parts can be sink but not short. If the injection plastic parts have flash, burns or air traps, write down in paper comment as the issue needs to fix
Set shot size to 97% full, should be done including an estimated holding time.
Set holding pressure to ½ the actual injection pressure.
Runoff samples and mark them trial number and date, this is very important information for us to find which samples are from the previous trial time, quantity according to customer requirements if parts are ok. 1 balance shot and 2-3 runners should always be sent together with the samples.
If you need any kinds of precision mold, please contact us, as a professional precision molding company, Fangling is willing to offer you high quality products.
在线联系供应商
Other supplier products
 |
EDM Sinking Mold Parts | Die sinking edm aluminum partsconsist of an electrode and the workpiece is submerged in an insulating liquid. The electrode and the workpiece of ED... |
 |
Cylindrical Mold Parts | Customized cylindrical partsaccording to customer's drawing requirement. Jobs: Hard Turning, Centerless Grinding, Punch Grinder, EDM Wire Cuttin... |
 |
CNC Hard Turning Mold Parts | Our CNC turning precision partsare mechanically manufactured and mostly rotationally symmetrical parts that are produced by turning as a manufactur... |
 |
PRECISION PLASTIC INJECTION MOLDS/TOOLS | When it comes to plastic injection molding, precise moulds and precision equipment are required for precision molding or PIM. Among the topics cove... |
 |
Threaded Mold Parts | A thread is a continuous helical ridge formed on the inside (nut) or outside (screw) of a cylinder. This ridge is called the crest. Between each cr... |
Same products
 |
Galvanized Fishtail Terminal End for Highway Guardrail | 卖方: Wuhan Dachu Traffic Facilities Co., Ltd | Galvanized Road Fence Highway Guardrail Crash Barrier Terminal Endare the specially designed end ... |
 |
COMMUNICATIONS PARTS | 卖方: ShenZhen Haohaichang Industrial Co.,Ltd | High Precision Parts are radar system componentsin radar systems, where accuracy, reliability, an... |
 |
POM CNC TURNING PARTS | 卖方: ShenZhen Haohaichang Industrial Co.,Ltd | CNC POMturning parts are precision components made from polyoxymethylene (POM) using computer num... |
 |
Nut | 卖方: ShenZhen Haohaichang Industrial Co.,Ltd | Nuts are essential hardware components that work in tandem with bolts, screws, or other threaded ... |
 |
HEATINGS/APPLIANCES PARTS | 卖方: ShenZhen Haohaichang Industrial Co.,Ltd | High Precision Parts are essential components in heating and appliance systems, contributing to t... |
