RE series crossed roller bearing for high precision applications
In crossed roller bearings, the crossed roller bearings are capable of withstanding radial load, axial load and moment load because the cylindrical rollers are arranged perpendicularly to each other on the V-shaped groove rolling surface of 900 by an isolating block Direction of the load. The inner and outer rings are miniaturized and the extremely thin form is close to the limit and has a high rigidity. Therefore, it is most suitable for the joint and rotation parts of the industrial robot, the rotary table of the machining center, the rotating part of the manipulator, Precision rotary table, medical equipment, calculators, IC manufacturing equipment and other equipment.
Rotation accuracy: the bearings are arranged vertically between the rollers with isolation block, to prevent the roller tilt and the friction between the rollers, reducing the torque. In addition, the edge stress concentration or locking of the roller does not occur as compared with the conventional use of the steel sheet holder. Also, since the inner ring or the outer ring is a two-segmented structure, the bearing clearance can be adjusted to smoothly rotate with high precision even when the preload is applied.
Bearing characteristics:
1, high precision: Accuracy can reach P4, P2 level;
2, high rigidity: The series bearings are preloaded;
3, high load: can withstand axial load, radial load, overturning load.
4, small size: the small size of the bearing can save space for the host.
RE-type (inner ring split, the whole outer ring) is also the basic type of cross roller bearings, but the structure of the inner ring as a whole, the outer ring is divided into two pieces, it is most suitable for applications requiring outer rotation accuracy of the occasion.
Other supplier products
|
|
RA、RB、RU、/crossed roller bearing for high precision applications |
In crossed roller bearings, the crossed roller bearings are capable of withstanding radial load, axial load and moment load, because the cylindrica... |
|
|
NATR series Supporting track roller bearing |
NATR and NATR ... PP type support roller NATR series of support rollers include outer ring, inner ring, needle roller cage assembly and pressed int... |
|
|
XK Full complement cylindrical roller bearings for rolling mill |
Full complement cylindrical roller bearings without cage, ring raceway row full of rollers, so than with cage bearings with greater load carrying c... |
|
|
Cooper split roller bearings for mining equipment |
Split bearing is not in the demolition of other parts of the shaft, can quickly and easily install the bearing, can shorten the maintenance cycle m... |
|
|
XK NNTR series Supporting track roller bearing |
NNTR type support roller NNTR series of roller bearings for double row full complement roller bearings, with inner ring, lip seals on both sides. T... |
供应产品
Same products
