Roller bearing XR820060P5 for vertical boring mill 580*760*80mm
The bearing XR820060p5 will used for high precision rotary table machine tool .we had offered the bearing xr820060 to Mexico. The bearing lubrication will be oil lubrication system.
The bearing XR820060 P5 specification as following:
Bearing factory items:XR820060
Bearing old type:XR 820060 615662A 615662A XD.10.0580P5
Bearing boundary inch size :22.8346x29.9213x3.1496 inch size
Bearing outer diameter inch size:29.9213 inch size
Bearing inner diameter inch size:22.8346 inch size
Bearing height inch size:3.1496 inch size
The bearing XR820060 mainly used for boring mills,Vertical grinding machines,Rotary surface grinding machines,Large gear hobbing machines and so on.
在线联系供应商
Other supplier products
 |
M5CT1242 食品饲料挤出机多级串联轴承工厂 12*42*104.6mm | 串联推力轴承 M5CT1242 设计用于水平轴应用（挤出机齿轮驱动），必须施加足够的推力载荷以防止滚子滑动。 通常，所需的最小载荷表示为轴承额定动载荷 (C) 与施加载荷 (P) 的比率。 必须避免 C/P > 12 的负载，并且应避免 C/P 介于 8 和 12 之间的负载。 M5CT... |
 |
立式加工中心采用XR766051 457.2x609.6x63.5mm交叉滚子轴承 | 交叉圆锥滚子轴承XR766051 457.2x609.6x63.5mm 包含两组滚道和滚子以高角度组合在一起，交替滚子面向相反方向。 横截面的高度与单列轴承相似，以节省空间和轴承座材料。陡角、锥形几何形状导致总有效轴承分布远大于轴承本身的宽度。交叉滚子轴承代号 XR766051相当于SKF 6... |
 |
Single row cylindrical roller bearing N18/500 500*620*56mm | Bearing code N18/500mp5 Bearing size 500x620x56mm Bearing outer dia 620 mm Bearing inner dia 500mm Bearing height 56... |
 |
61848 deep groove BALL strander bearing 240*300*28mm in stock | Bearing code 61848mp5 Bearing size 240x300x28mm Bearing outer dia 300 mm Bearing inner dia 240mm Bearing height 28mm ... |
 |
Tubular Strander Machine use single row cylindrical roller bearing 527467 shaft diameter 1120mm | Bearing code 527467 Bearing size Contact Bearing outer dia Contact Bearing inner dia 1120mm Bearing height Contact ... |
Same products
 |
Tubular Stranding machine use bearing 527247 | 卖方: JinHang Precision Bearing Co.,LTD | The cylindrical roller bearings Z527247ZL have high rigidity, high radial load carrying capacity.... |
 |
Bearing Z-527462.ZL For Control cable tubular strander machine | 卖方: JinHang Precision Bearing Co.,LTD | Single row cylindrical roller bearings Z-527462.ZL with cage are units comprising solid inner and... |
 |
High speed rotor bearing Z-537024.ZL for strander machine | 卖方: JinHang Precision Bearing Co.,LTD | The bearings Z-537024.ZL can be lubricated from the end faces using grease or oil.The bearing 53... |
 |
Rotating bearing Stainless steel wire stranding machine 527461 | 卖方: JinHang Precision Bearing Co.,LTD | Single row cylindrical roller bearings Z-527461.ZL with cage can be used at operating temperature... |
 |
Non-standard tubular strander bearing Z-527460.ZL | 卖方: JinHang Precision Bearing Co.,LTD | Speical roller bearing 527460 have a lubrication groove and three lubrication holes in the outer ... |
