Double Row Cylindrical Roller Bearing NNU4952/W33
Double Row Cylindrical Roller Bearing
Part No.: NNU4952/W33
Inner Ring: 260.000mm
Outer Ring: 360.000mm
Width: 100.000mm
Outside Diameter of Inner Ring: 289.000mm
Chamfer: 2.1
Basic Dynamic Load Rating: 981.75KN
Basic Static Load Rating: 2310KN
Limited Speed (rpm): 1512(grease)/2016(oil)
Gross Weight: 29.2kg
Brass Cage, With An Oil Groove and Lubricating Holes
Double row cylindrical roller bearings are divided into bearings with cylindrical bore and tapered bore (add K behind bearing type). This type of roller bearings have compact structure, good rigidity, heavy load carrying capacity, and little distortion under loads. Because of their second row of rollers, double row cylindrical roller bearings are suitable for heavy radial loads. Double row cylindrical roller bearings are applicable for the machine tool spindle. Tapered inner bore could fine adjust clearance, simplify positioning fixture and be convenient to mount and dismount.
Depending on the existence of ribs on their rings, double row cylindrical roller bearings are classified into NN, NNU types.
Type NN double row cylindrical roller bearings have two integral flanges on the inner ring, a flangeless outer ring and a center flange in the middle. Double-row cylindrical roller bearings permit axial displacement in double directions of the housing relative to the shaft.
Type NNU double row cylindrical roller bearings have two integral flanges on the outer ring, a non-contacting inner ring and a center flange in the middle. Double row cylindrical roller bearings permit axial displacement in double directions of the housing relative to the shaft. Therefore, this type of bearing is suitable to be used as non-locating bearings.
Other supplier products
|
|
Spherical Roller Bearing 22222CAW33 |
Spherical Roller Bearing 22222CAW33Inner Ring: 110.000mmOuter Ring: 200.000mmWidth: 53.000mmChamfer: 2.1mmBasic Dynamic Load Rating: 428KNBasic Sta... |
|
|
Spherical Thrust Roller Bearing 29338 |
Spherical Thrust Roller Bearing 29338Inner Ring: 190.000mmOuter Ring: 320.000mmWidth: 78.000mmChamfer: 4mmBasic Dynamic Load Rating: 1470KNBasic St... |
|
|
Single Row Tapered Roller Bearing 30228 |
Single Row Tapered Roller BearingPart No.: 30228 I.D: 140.000(mm)O.D: 250.000(mm)width: 45.750(mm)Width of inner ring: 42.000(mm)Width of outer rin... |
|
|
Four Row Tapered Roller Bearing 382968 |
Four Row Tapered Roller Bearing 382968Inner Ring: 340.00mmOuter Ring: 460.00mmWidth: 310.00mmChamfer: 4mmBasic Dynamic Load Rating: 2100KNBasic Sta... |
|
|
Spherical Roller Bearing 22332MBW33 |
Spherical Roller Bearing 22332MBW33Inner Ring: 160.000mmOuter Ring: 340.000mmWidth: 114.000mmChamfer: 4mmBasic Dynamic Load Rating: 1449KNBasic Sta... |
供应产品
Same products
