LFP Module
The structure of LFP modules mainly has a banding structure. Due to the high flexibility of banding modules, the quantity in series and parallel of lithium ion batterycells can be determined according to the demand of customers. Generally, Lithium Storage offers the following LFP battery modules:
Flexibility in series and parallel 50~302Ah lithium battery cells, 1P8S or 1P4S LFP modules are common types.
Heating pad is optional
Connector type and definition can be customized
LFP Battery Module or Cell with Nut/Screw Terminals-Pack?
For improving production efficiency, the positive and negative terminals of lithium-ion batteries have been upgraded from screw-hole terminals to flat welding terminals. The new generation lithium batteries require welding equipment for battery connections. Sorting out the demand from the international market, many international customers still prefer to choose cells that screws or bolts can connect than flat welding terminals. The following points are pointed out by customers:
The total pack or custom moduleneeds to be replaced once one cell of the battery pack fails in the operation. As well as, there is a dimension limit on module size for different application cases from the local market, and there is low feasibility of using the same module to meet all pack requirements. Therefore, customers prefer cells with nut/screw terminals for the flexibility of pack installation.
However, as a professional lithium ion battery supplierin China, Lithium Storage recommends customers select LFP battery modules instead of cells with nut/screw terminals because of their high structural stability and welding reliability.
LFP Banding Module Structure
The LFP battery module has high flexibility in production due to its structural characteristic.
lithium battery cells are connected by an aluminum busbar via laser welding.
Banding belt structure, the upper part is a steel belt and the lower part is a plastic belt.
M4 hole on the aluminum busbar is applied to fix sampling wiring.
Bolt connection for the positive and negative output of modules
Standardized mold plastic end plate design
LFP Battery Module Certifications
|
Cell type |
Quality Management System |
Products Certification |
|||||||||||||||||
|
ISO-9001 |
IATF16949 |
ISO-14001 |
ISO-45001 |
GB/T 31485-2015 |
GB/T 31486-2015 |
GB/T 31484-2015 |
GB/T 36276-2018 |
GB 38031-2020 |
GB/T 31467.3-2015 |
IEC62619 |
UL1642 |
UL9540 |
UL1973 |
CE-Battery Directive /RoHS |
MSDS |
BIS |
JET |
||
|
LFP40Ah |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
/ |
/ |
/ |
√ |
/ |
/ |
/ |
/ |
√ |
√ |
/ |
/ |
|
LFP50Ah |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
/ |
√ |
/ |
√ |
√ |
/ |
/ |
√ |
√ |
√ |
√ |
√ |
|
LFP100Ah |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
/ |
√ |
/ |
√ |
/ |
/ |
/ |
√ |
√ |
√ |
/ |
/ |
|
LFP135Ah |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
/ |
√ |
/ |
/ |
/ |
/ |
/ |
/ |
√ |
√ |
√ |
/ |
|
LFP205Ah |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
/ |
√ |
/ |
/ |
/ |
/ |
/ |
/ |
√ |
√ |
/ |
/ |
|
LFP280Ah |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
/ |
√ |
/ |
/ |
/ |
/ |
/ |
/ |
√ |
√ |
/ |
/ |
|
LFP280Ah long cycle |
√ |
√ |
√ |
√ |
/ |
/ |
/ |
√ |
/ |
/ |
√ |
/ |
√ |
√ |
/ |
√ |
√ |
/ |
/ |
|
LFP302Ah |
√ |
√ |
√ |
√ |
√ |
√ |
√ |
/ |
√ |
/ |
/ |
/ |
/ |
/ |
/ |
√ |
√ |
/ |
/ |
在线联系供应商
Other supplier products
 |
LiFePO4 135Ah Battery | Conform79148 VDA dimension format Support 1C charge and discharge rate 4000times outstanding cycle life with maximum reliability. Uninterr... |
 |
NCM Module | There are two options for the lithium nmc battery, NCM102Ah-1P6S or NMC177Ah 1P4S. Both modules conform to the German Association of Automotive Ind... |
 |
NCM Module | There are two options for the NCM module, NCM102Ah-1P6S or NMCLFP177Ah 1P4S. Both modules conform to the German Association of Automotive Industry ... |
 |
LiFePO4 100Ah Battery | Standardized cell format and holistic safety concept of cell. Support 1C charge and discharge rate. 4000times cycle life with maximum reliabi... |
 |
Deep Cycle LiFePO4 280Ah Battery | This 280ah lithium deep cycle battery series belongs to the GB 71173 series of dimension format 6000 times outstanding cycle life with maximum rel... |
Same products
 |
For Mercedes-Benz-C-206 Modified Bumper Mould | 卖方: Taizhou Huangyan Chenpeng Mould Co., Ltd. | Taizhou Huangyan Chenpeng Mold Co., Ltd. is a professionalwholesale Mercedes-Benz-C-206 Modified ... |
 |
Front Bumper Lower Lip Mould | 卖方: Taizhou Huangyan Chenpeng Mould Co., Ltd. | Introducing the for 2021 Honda CRV Front Bumper Lower Lip Mould: Elevate Your Driving Experienc... |
 |
Bottle cap mold | 卖方: Taizhou Huangyan Yongsheng Mould Co., Ltd. | Taizhou Yongsheng Mould Co., Ltd. can produce cap moulds （）within 64 cavities. The hot runner or ... |
 |
Plastic Injection Mould For 2009 Audi A5 Front Bumper | 卖方: Taizhou Huangyan Chenpeng Mould Co., Ltd. | Our Advantage:1.We have developed about 1000 PCS bumper mould since we founded.2.Our company's mo... |
 |
Double Color Mold For Car Head Lighting Two-Shot Mold | 卖方: Taizhou Toolsong Mould Co., Ltd. | Double Color Mold For Car Head Lighting Two-Shot Mold Double color lens mold for car head lighti... |
