Tobee® 18x16TU-G Gravel Pump
Tobee® 18x16TU-G Gravel Pumpis designed for continuous handling of the most difficult higher abrasive slurries, containing solids too large to be pumped by a standard slurry pump, The 18x16 gravel pump is widely used for Sand Excavation, Coal Washery, Power Plant, Mineral Processing Plants, Other industries.
Design Features:
• The unique segmented clamp ring on larger size units and solid on smaller pumps, facilitates casing rotation to any angle, reducing the need for costly high wearing bends. Minimal maintenance is required.
• Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area. Efficiency is maintained by minimising suction side recirculation.
• Specially designed and shaped impeller vanes allow the handling of extraordinarily large particles. The unique casing design and sealing vanes prevent abrasive solids intrusion at the sealing faces.
• The large, robust casing has been designed to reduce internal velocities resulting in minimum efficiency loss and improved casing wear life. The casing is made up of three components to reduce maintenance time and costs associated with a onepiece design.
• Tobee heavy-duty grease lubricated taper roller bearing assemblies are fitted as standard. A rigid large diameter shaft with reduced overhang minimises deflection and vibration under all conditions ensuring trouble free operation. Unusually high service factors enable the assembly to carry all radial and axial thrusts.
• A unique “-10” (dash 10) end cover assembly comprising of V-seals, double piston rings and an external flinger with grease lubricated labyrinths are standard with all Tobee pump.
HEBEI TOBEE PUMP CO.,LIMITED
Email:
| |
在线联系供应商
Other supplier products
Tobee® 20/18TU-AHR Rubber Slurry Pump | Tobee® 20/18TU-AHR Rubber Lined Slurry Pumpfeatures a split-casing design with molded, replaceable rubber liners. The molded liner may be speci... | |
Tobee® 12/10ST-AHR Rubber Slurry Pump | Tobee®Rubber Lined Slurry Pumps Sealing Arrangement: Packing Seal As one of the most commonly used seals for rotating shafts, the packing seal... | |
Tobee® WRT1 Slurry Pump Wear Parts Throat Bush E4083WRT1R55 | Tobee®Slurry Pump Throat bush E4083WRT1R55is used for 6x4 AH Rubber Lined Slurry Pumps.It links plate liners to forms a Pump chamber to work wi... | |
Tobee® 150SV-SP Vertical Slurry Pump | Tobee® 150SV-SP Vertical Slurry Pumpis available in a wide range of popular sizes to suit most pumping applications. Thousands of these pumps a... | |
Tobee® 12x10 AH Slurry Pump Parts WG10083WRT1A05 Throatbush Spares | Tobee® The range ofWRT slurry pump partsis interchangeable and retrofitable into all current AH range slurry pumps,Slurry Pump WRT Spare Partsn... |
Same products
潜水电机水泵 | 卖方: 天津佰诚国际贸易有限公司 | QN/QM 6 " 8 " 10 " 12 "潜水电机 Ritz 1215/2-1218/2-1222/2潜水电机 PQ不锈钢潜水泵 VHS 深井泵电机 潜水电机配件 产品广泛应用于喷... | |
China offer Plunger pump A10VS0-100DR-31R-PPA12N0 for Electric Company | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China offer Plunger pump A10VS0-100DR-31R-PPA12N0 for Electric CompanySelection of advanced tech... | |
40PV-TSP(R) Vertical Slurry Pump | 卖方: Shijiazhuang Ruite Pump Co., Ltd | 40PV-TSP(R) Vertical Slurry Pump Product Description 40PV-TSP(R) Slurry Pump is ideal for a var... | |
12/10ST-TAHR Slurry Pump | 卖方: Shijiazhuang Ruite Pump Co., Ltd | 12/10ST-TAHR Slurry Pump Product Description The feature frame and cover plates made out of gre... | |
China made Guide pin 0069/0070 for power station | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China made Guide pin 0069/0070 for power stationThe company has a large flow, high discharge pre... |