Danfoss Hydraulic Pump
Danfoss Hydraulic Pump
Danfoss 90 series axial piston variable displacement pump
●The optimal 9-plunger cylinder rotating assembly has been verified
●Smaller size, higher efficiency
●System a and port B are all metric threads
●Manual control
The 90 series variable displacement pump is a compact, high power density hydraulic component. The design concept adopts parallel arrangement of axial piston slippers and changes the plunger stroke through an inclined swash plate with variable angle.
Then the displacement of the pump can be changed.
The pump outlet oil direction changes with the swash plate direction, so as to realize the forward / reverse switch of motor output shaft.
The integrated make-up oil pump on series 90 pumps provides the system with supplementary hydraulic oil, cooling oil and pressure oil for control.
A series of auxiliary mounting flanges can be selected on the rear end cover of the pump.
Meet the requirements of series pump in related application.
A variety of control modes can be selected to meet the specific control requirements of different systems (manual control, electronic control and hydraulic control).
The design concept of 90 series motor also adopts parallel arrangement of axial plunger / slipper, and the swash plate is fixed or variable.
The motor can rotate in both directions, and the circuit flushing valve can be selected on the motor.
In order to realize circulating cooling and cleaning filtration of working hydraulic oil in closed circuit.
在线联系供应商
Other supplier products
 |
Transfer Case Series | Transfer Case Series FDX700-1:2 technical parameters Maximum power p 700kW Input torque T 3000Nm Single pump power p 330kW Maximum torq... |
 |
Eaton Hydraulic Pump | Eaton Hydraulic Pump ● Structural characteristics/advantages of heavy hydraulic pumps and motors: ● Pressure up to 6000 psi (420 bar) ● Speeds ... |
 |
Danfoss Quantitative Motor | Danfoss Quantitative Motor S90 fixed motor ●Proven better 9 plunger cylinder rotating assembly ●The displacement of the motor and the pump are ... |
 |
Eaton Hydraulic Motor | Eaton Hydraulic Motor Model Displacementcm3/r [ in3/rev] Flow lpm [gpm] Rotatingspeedrpm High/Low preset pressure bar [psi] Peak pressure bar ... |
 |
PMP Pump | PMP Pump The core design concept of PMP variable displacement pump is: efficient and durable, using high-quality materials, tight tolerances and h... |
Same products
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
新款 YHCB 系列可移动卧式圆弧齿轮输油泵 | 卖方: 河北盛辉泵业 | YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要... |
 |
便携式WCB系列不锈钢高粘度柴油齿轮输送泵 | 卖方: 河北盛辉泵业 | WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，... |
 |
库存 ZYB 系列不锈钢废重油输送高压齿轮泵 | 卖方: 河北盛辉泵业 | ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用... |
