Cylindrical Plug Valve
The plug body of cylindric plug valve is in cylindrical shape, which makes up of a sealing pair with the tapered hole surface of valve body. Cylindric plug valve is generally sealed in four ways, namely, sealant, valve plug expansion, O-ring, eccentric plug wedges into valve seat.
Contact us
Cylindrical plug valvewith a Teflon sleeve and plug seal in the valve body, which is pressed into the valve body with a compression nut, and the expansion force of the Teflon sleeve is used to seal.
The use of cylindrical plug valves depends to some extent on the seal between the plug and the valve body. Generally cylindrical valveoften use four sealing methods, namely, using a sealant, using a plug expansion, using a 0-ring seal, and using an eccentric plug wedge seat seal. The sealing of the cylindrical lubrication plug valve is achieved by the sealant between the valve plug and the valve body. The sealant is injected into the sealing surface through the valve plug rod by bolts or injection guns, so when the valve is in use, it can effectively compensate for the lack of sealing by injecting a supplemental sealant.
Lubricated plug valves are particularly suitable for abrasive media because the sealing faces are protected from contact with the flowing medium in the fully open position. However, lubricated plug valves are not suitable for throttling because the sealant is flushed from the exposed seal surface during throttling so that the seal of the seat is restored each time the valve is closed.
The disadvantage of this valve is that the addition of the sealant often requires manual work. The use of automatic injection can overcome this disadvantage, but the cost of adding equipment needs to be increased. Once the valve is cleaned or repaired due to lack of maintenance or due to improper selection of sealant, or crystallization between the sealing faces and the valve plug not rotating in the valve body.
Cylindrical plug valve with a Teflon sleeve and plug seal in the valve body, which is pressed into the valve body with a compression nut, and the expansion force of the Teflon sleeve is used to seal .
Technical Specification of Cylindrical Plug Valve:
Nominal Bore: 1"~3"
Working Pressure : 2000psi ~ 15000psi
Temperature Level: –75° F ~ +250° F
Body Material: AA、BB、CC、DD、EE、FF、HH
Specification Level: PSL1~PSL3G
Performance Level: PR1~PR2
Saigao Groupis a professional oil equipment suppliers, we provide oilfield cementing tools, circulating swage, pumping unit parts, ditch magnet drilling and etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
Non-rotating Stabilizer | Non-rotating stabilizer(rubber sleeve stabilizer) is able to avoid blade wear and wall damage during. The non-rotating stabilizerconsists of mandre... |
 |
BW1200 / 7 Horizontal Double Cylinder Reciprocating Double Acting Piston Pump | BW1200/ 7 slurry pump is a horizontal double cylinder reciprocating double-action piston pump. The power has electric driving and diesel driving. ... |
 |
Hydraulic Liner Hanger Polished Bore Receptacle | Hydraulic Liner Hanger Polished Bore ReceptacleMated with tie-back assembly, it can tieback the liner to the top of well and act as efficiency seal... |
 |
Manifold | Overview of china manifold A manifold is a combination of multiple pipes. The manifold includes gate valves, pipelines, pipe fittings, pressure ga... |
 |
Choke Valve | Choke valve is a valve that controls the flow of a fluid by changing a throttle section or a throttle length. The choke valve and the check valve a... |
Same products
 |
JET100A 电动自吸射流泵 | 卖方: 才福泵业有限公司 | JET100A 自吸式射流泵专为地面安装及加压供水应用而设计。该泵广泛应用于家庭、农场及小型商业系统，适用于需要自动吸水、压力稳定及远距离输水的场合。 |
 |
2BV2 060 Water Ring Vacuum Pump for Mine | 卖方: Greentech International (Zhangqiu) Co., Ltd | 2BV2 060 Water Ring Vacuum Pump for Mine2BV series liquidring vacuum pumps are suitable for pumpi... |
 |
High Vacuum Pump 2be 203 Series Water Ring Pump | 卖方: Greentech International (Zhangqiu) Co., Ltd | Application scope and characteristics: Greentech International (Zhangqiu) Co., Ltd is the profes... |
|
|
Zbk03 Series Roots Vacuum Pump/Roots Pump | 卖方: Greentech International (Zhangqiu) Co., Ltd | ZBK series roots vacuum pump is a kind of coarse vacuum acquisition of equipment, it is widely us... |
 |
"Brand Assurance Globe valve GR2-0-KB-G5/30X48 for power generation | 卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "Brand Assurance Globe valve GR2-0-KB-G5/30X48 for power generation YOYIK is a large number of st... |
