Drill Collar and Spiral Drill collar
Drill collar is mainly used to provide bit weight to drill bit so that drill pipe is in tension. Especially drill collar can keep drill bit centralized and hole track by large rigidity. Spiral drill collar is used to reduce contact area with hole so as to avoid efficient bit stricking from differential pressure. Our drill collars are manufactured as per API spec. 7.
The Spiral Drill Collarof Lake is made from AISI 4145H modified alloy steel, and completely meets the requirement of API Spec 7-1 and SY/T5144 Standard. It is a kind of drill collar which adds three dextrogyrate spiral groove on the outer circle of ordinary drill collar when processing, and the purpose is to reduce the area of contact and friction with the well wall, which can effectively prevent the pressure sticking. The single weight of the spiral drill collar is round about 4% lighter than the ordinary drill collar with the same specification, and the shape and thread of the both ends are the same with the drill collar.
Materials:
Drill collars are manufactured from AISI 4145H modified steel, and are supplied in the "as rolled" surface finish condition. Alternative surface finishes are available.
Trepanning and Heat Treatment:
Drill collars are trepanned and drifted to API Spec 7-1. Full-length heat-treatment processes ensure that mechanical properties meet or exceed API Spec 7-1 requirements. A hardness range of 285-341, Brinell hardness and Charpy "V" notch minimum impact strength of 40 ft-lb at 70 F are guaranteed one inch below the surface.
Trace Ability:
Drill collar material and process trace ability are maintained from receipt of the mill's certified raw material to completion of manufacturing. Serial numbers are die stamped on bar bodies.
Rigid Inspection Procedures:
We inspect all our drill collars to ensure compliance with API SPEC 7-1 standards. These inspections include visual dimensional checks as well as ultrasonic inspections over the entire body of the drill collar.
Cold Rolling:
Drill collar thread roots, as well as elevator recess upper radius, are cold-rolled. Cold rolling creates a compressive recess upper radius stress condition that increases fatigue life by minimizing crack initiation.
Phosphate-coated or Copper Plating:
All connections are phosphate-coated or copper plated to improve resistance to corrosion.
Slip Groove, Elevator Groove and Size:
Saigao offers optional slip and elevator recesses to improve handling efficiency and safety. Unless otherwise specified, slip and elevator recesses are machined in compliance with API spec 7-1 guidelines.
Features of Drill Collar and Spiral Drill collar:
Eccentric-weight drill collar is an effective anti-deviation drilling tool,with high drill pressure used in oblique areas,rectifying oblique as well.
When drilling directional wells eccentric-weight drill collar is an effective tool to reduce oblique or straighten the well hole using high drilling pressure.
Eccentric-weight drill collar has the advantages of simple structure,convenient use,connected directly to common drill collar without centralizers,greatly convenient for sinking in,fishing and milling operations.
Eccentric-weight drill collar runs downhole safely,danger of leakage or bit freezing hard to appear.
TechnicalSpiral Drill Collars Specificationsand Spiral Drill collar:
|
Drill collar thread type |
OD |
ID |
Length (mm) |
||
|
NC23-31 |
mm |
in |
mm |
in |
|
|
NC26-35 ( 23/8 ″ IF ) |
3 1/8 |
11月4日 |
9150 |
||
|
NC31- 41(27/8 ″ IF) |
31/2 |
11月2日 |
9150 |
||
|
NC35-47 |
Aug-41 |
2 |
9150 |
||
|
NC38-50(31/2 ″ IF) |
Apr-43 |
2 |
9150 |
||
|
NC44-60 |
127 |
5 |
4月21日 |
9150 |
|
|
NC44-60 |
6 |
4月21日 |
9150 (or) 9450 |
||
|
NC44-62 |
6 |
2 13/16 |
9150 (or) 9450 |
||
|
NC46-62(4 ″ IF) |
Apr-61 |
4月21日 |
9150 (or) 9450 |
||
|
NC46-65(4 ″ IF) |
Apr-61 |
2 13/16 |
9150 (or) 9450 |
||
|
NC46-67(4 ″ IF) |
Feb-61 |
2 13/16 |
9150 (or) 9450 |
||
|
N50-67(4 1/2 ″ IF) |
Feb-61 |
2 13/16 |
9150 (or) 9450 |
||
|
NC50-70(4 1/2 ″ IF) |
Apr-63 |
2 13/16 |
9150 (or) 9450 |
||
|
NC50-70(4 1/2 ″ IF) |
Apr-63 |
2 13/16 |
9150 (or) 9450 |
||
|
NC50-72(4 1/2 ″ IF) |
7 |
2 1/4 |
9150 (or) 9450 |
||
|
NC50-70(4 1/2 ″ IF) |
7 |
2 13/16 |
9150 (or) 9450 |
||
|
NC50-72(4 1/2 ″ IF) |
Apr-71 |
2 13/16 |
9150 (or) 9450 |
||
|
NC56-77 |
Apr-73 |
2 13/16 |
9150 (or) 9450 |
||
|
NC56-80 |
8 |
2 13/16 |
9150 (or) 9450 |
||
|
6 5/8 ″ REG |
Apr-81 |
2 13/16 |
9150 (or) 9450 |
||
|
NC61-90 |
9 |
2 13/16 |
9150 (or) 9450 |
||
|
7 5/8 ″ REG |
9 1/2 |
3 |
9150 (or) 9450 |
||
|
NC70-97 |
Apr-93 |
3 |
9150 (or) 9450 |
||
|
NC70-100 |
254 |
10 |
3 |
9150 (or) 9450 |
|
|
8 5/8 ″ REG |
11 |
3 |
9150 (or) 9450 |
||
Saigao Groupis a professional spiral drill collar manufacturers, we provide oilfield cementing tools, circulating swage, pumping unit parts, ditch magnet drilling and etc. Want to know more? Please contact us.
在线联系供应商
Other supplier products
 |
Cement Manifold | Cementing manifold is used to control the cement fluid from cementing pump and transform the cement fluid to wellhead and accomplish cementing oper... |
 |
Circulating Swage | Saigao casing circulating swageis forged from high-grade steel materials and machined to the required specifications. After heat treatment and non-... |
 |
Hydraulic Liner Hanger Polished Bore Receptacle | polished bore receptacle liner hangerMated with tie-back assembly, it can tieback the liner to the top of well and act as efficiency sealing. The p... |
 |
Drill Pipe | The china drill pipeis a steel pipe with a tail thread for connecting the surface equipment of the drilling rig and the drilling equipment or botto... |
 |
Non-Rotational Cement Float Collar | Non-Rotational Cement Float Collar SAIGAO GROUPCement/Plunger-type float equipment offers dependable performance for all classes of oil and gas we... |
Same products
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
新款 YHCB 系列可移动卧式圆弧齿轮输油泵 | 卖方: 河北盛辉泵业 | YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要... |
 |
便携式WCB系列不锈钢高粘度柴油齿轮输送泵 | 卖方: 河北盛辉泵业 | WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，... |
 |
库存 ZYB 系列不锈钢废重油输送高压齿轮泵 | 卖方: 河北盛辉泵业 | ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用... |
