Floor Standing Industrial Dehumidifier

In industrial environment, the harm caused by excessive humidity is not negligible. Excessive humidity can lead to corrosion, such as corrosion of steel with a humidity of more than 60%. Electrical equipment operates over a longer period of time in an environment where humidity exceeds 70%, easy to damage and cause accidents. Industrial materials also reduce storage time in environments with excessive humidity.

Thenowfloor standing industrial dehumidifier, according to the dehumidification capacity, can remove 90L to 480L moisture per day from the air and replace it with fresh, filtered air. The industrial dehumidification equipmenthelps to keep indoor air at a reasonable humidity level, which helps to keep every member of the industrial area healthy.

Features of Floor Standing Dehumidifier:

Ultra dehumidification capacity: 90L to 480L per day,keep you away from dampness

Well-known brand compressor, strong performance and stable quality, dehumidifying power is stronger

Condensation effect is more significant.

High quality evaporator and condenser.

Hydrophilic film surface, which can speed up the cooling speed and prevent the condensation water from obstructing the air flow to produce a certain amount of noise.

Reasonable design and excellent material ensure dehumidification efficiency, energy efficiency ratio is also higher.

High rotation speed centrifugal fan, high power and low noise.

Automatic humidity control system

Low pressure protection, anti-freeze protection, current overload protection and other important protection devices.

A number of operation and fault display functions, running safely and stably.

Data ofIndustrial Dehumidification Systems

Model	CT-190/1600-GD01	CT-240/2500-GD01	CT-350/3200-GD01	CT-480/5000-GD01
Power supply	3PH/380V/50HZ
Supply Air(m3/h)	1600	2500	3200	5000
Power(W)	2800	4000	5500	9000
Dehumidification(L/D)	190	240	350	480
Residual Pressure(Pa)	180	200	230	250
Max Length of Duct（m）	30	35	38	40
Application area(m²)	<260	<400	<550	<800
Noise dB(A)	62	65	68	70
Outline Dimension	1160*820*600	1160*820*600	1370*1120*720	1370*1120*720
Return air outlet	500*400	500*400	750*450	750*450
Supply air intlet	350*350

If you want to know more about ductless HRV, please visit our website.

Other supplier products

	Uni-Flow Wall Mounted Ventilator-BG Series	Features of Uni-Flow Wall Mounted Ventilator-BG Series: BLDC motor, lower noise Unique air duct design, fast purification and ventilation Specif...
	Wall Mounted Ventilator	Home ventilator is Uni-Flow wall mounted ventilator. It can only bring in fresh outside air, and filtered it even preheated it if necessary. Mainly...
	Ceiling Mounted Dehumidifier	We have hrv units for sale! Thenow residential ceiling mounted energy recovery ventilator-HEPA Series added HRVwithHEPA filtersafter G3 or F7 filte...
	Central Dehumidifier	What's a central dehumidifier? Through the pipelines installed in each room, the humid air is extracted, and the moisture in the air is used to con...
	Wine Cellar Cooling Units Split System	Thenowwine cellar cooling units split system is intended for cellars without access to proper ventilation. They are known for their efficiency and ...

供应产品

Same products

	OEM 定制卧式 LB 系列冰箱润滑油齿轮泵	卖方: 河北盛辉泵业	LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结...
	OEM 定制卧式 LB 系列冰箱润滑油齿轮泵	卖方: 河北盛辉泵业	LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结...
	新款 YHCB 系列可移动卧式圆弧齿轮输油泵	卖方: 河北盛辉泵业	YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要...
	便携式WCB系列不锈钢高粘度柴油齿轮输送泵	卖方: 河北盛辉泵业	WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，...
	库存 ZYB 系列不锈钢废重油输送高压齿轮泵	卖方: 河北盛辉泵业	ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用...