Micro Piston Pump
Micro Piston Pumpis a type of high-cost performance but high precision fluid dispensing pump for microfluidics from microliters to milliliters, some of them are equipped with a control driver while some not to meet different customers' needs. Standard volume 6ml piston pump works at resolution 1.57μL with repeatability of 0.3%-0.7%, users can control the motor by themselves or use our stepper driver with communication control. The micro piston pump is a very popular and smart precision syringe pump choice for medical systems.
Advantages of Micro Piston Pump
High Quality Materials Selection
RUNZEmicro pistonpumps are made of the ceramic cylinder and PC outlet to meet the increased requirements of analysis, it is biocompatible corrosive resisting, non-leakage and reusable in fluidic systems, small footprint and high-cost performance makes it famous star in medical analytical instruments.
Accurate Control Units
The micro piston pumps are composed of a communication driver, high precision stepper motor, optical encoders to work together on achieving the most reliable control systems, besides they are maintenance-free for convenient use.
High Cost Performance
Micro piston pumps have the most configurations from our MiNi SY-04 syringe pumps, the only difference if syringe part, but its cost is much lower than MiNi SY-04 syringe pumps because it is mainly used in low-cost medical devices in large quantities, system cost must be lowered down from each key parts inside, micro piston pumps rightly do this job.
Applications of Micro Piston Pump
Micro Piston Pump is one of the high precision components in medical fluid systems, all the wetted materials are corrosion-resisting to meet the needs of most fluidic systems. Fluid control equipmentis widely used in environmental analyzers, laboratory instruments, medical equipment, petrochemical systems, food and beverage vending machine, bio-pharmaceuticals analysis, and metering. High stability is the most important factor, quality materials, complete software, high-quality molding, and machining make these realized to a high level.
在线联系供应商
Other supplier products
 |
Micro Piston Pump | Micro Piston Pumpis a type of high-cost performance but high precision fluid dispensing pump for microfluidics from microliters to milliliters, som... |
 |
Miniature Peristaltic Pump | RUNZE FLUID, a professional microfluidic components supplier, offers a complete product range of microfluidic instrumental components including ind... |
 |
Peristaltic Pump Head | Peristaltic Pump Headsis the most important part for a full unit peristaltic liquid pump, it is responsible to drive the suitable tubes to reach th... |
 |
Selector Valve | Selector valve is a type of multiport flow selector valvewith public port and dispensing ports around, the public port is used to inlet liquid whil... |
 |
High Pressure Solenoid Valve | HighPressure Solenoid Valveis a type of switching valve with rotor and stator but works same as common solenoid valves, the difference is that this... |
Same products
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
新款 YHCB 系列可移动卧式圆弧齿轮输油泵 | 卖方: 河北盛辉泵业 | YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要... |
 |
便携式WCB系列不锈钢高粘度柴油齿轮输送泵 | 卖方: 河北盛辉泵业 | WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，... |
 |
库存 ZYB 系列不锈钢废重油输送高压齿轮泵 | 卖方: 河北盛辉泵业 | ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用... |
