LEFOO BRUSHLESS RO BOOSTER PUMP
This brushless RO booster pump series is powered by a permanent magnet brushless motor, 0.5/0.7 Mpa pressure feeding,42~45db noise level, adjustable pressure, Workflow 2.7~5Liter per minute, Max current 3.2~5.0A
WHAT IS A BRUSHLESS RO BOOSTER PUMP?
A brushless RO booster pump employs the NdFeB permanent magnet arc motor that has no-brush, which provides tremendous magnetic torque and has the lowest noise level, Lefoo brushless pumppumping pressure for Reverse Osmosis water system which can generate 300-1000 gallons per day. Helps increase the pressure and volume of reverse osmosis water that flows to the storage tank, to the tap, to the faucet or showerhead. low tap water pressure under 40 psi is a nuisance in daily lives. Low water pressure can be fatal In food and beverage RO water applications, A brushless RO booster pump may be the ideal solution to offer the pressure for commercial RO water systems from Lefoo.
WHAT IS A REVERSE OSMOSIS SYSTEM
Reverse Osmosis is a process in which tap water or outdoor water passes through filters and passes through a semi-membrane that removes contaminants and becomes the purify water transferred by the pipework to the clean water tank. The contaminants could be chemicals, bacteria and viruses, Calcium salts and alkalis, and heavy metals. The purity and quantity of RO water are pending on the water pressure in the tap water chamber separated by the RO semi-membrane.
A reverse osmosis water system is consists of numerous water filters, an RO booster pump( when city water pressure is under 60 psi), clean water camber, dirty water camber, and pipe works. RO water systems can be used to remove impurities, solids, and chemicals. Reverse osmosis is becoming an increasingly popular choice due to the fact it can remove more than most other systems.
WHERE TO APPLY BRUSHLESS RO BOOSTER PUMP
Tap water or town water (city water) are raw waters that contain bleach, chlorine, minerals, which are bad in taste. Outdoor waters and groundwater are raw waters that may contain contaminants, viruses, and parasites, too many minerals, alkalis, mercury, lead, and salt. People in some mountain areas often drink calcium-salt water, which is prone to kidney stones. Drinking water with excessive mercury and lead is prone to poisoning, leading to blindness, hair loss, or rickets. RO requires a higher pressure pump to drive the water through the membranes. For public water supply facilities in these areas, it is highly suggested to have one Brushless RO Booster Pump
The RO process improves the purity and quality of the incoming water supply by reducing the micro-Siemens and total dissolved solids (TDS). Some food and beverage industries in the cities and towns need Brushless RO Booster Pumps in their RO water systems, which is for commercial purposes as RO water tastes quite fresh and light. The pump provides the ultra boosting needed to bring your water pressure to the desired level. A brushless RO booster pump provides pressure to move water from a storage tank or throughout a whole house or commercial facility.
WHAT ARE THE COMPONENTS OF A BRUSHLESS RO BOOSTER PUMP?
The pump contains the same core components:
Motor, A motor offers power and torque.
Irregular propellers for up and down spinning, and boost the pressure
Fluid chambers to recycle and control the water flow
Inlet and outlet for pipework
flow sensing device
NEED A BRUSHLESS RO BOOSTER PUMP?
Which booster pump you need depends on how much water your end customer use, the desired pressure, and the location of their water source. If they have a large house need a booster pump capable of supplying water to the second or third floor. Applications, like reverse osmosis water systems with low feed pressure or water with a high TDS (total dissolved solids), require a lot more pressure.
LEFOO RO booster pumps are extensively applied to varying industry fields, such as Home Water Purification, Food and Beverage Industry, Hotel Water Treatment, MedicalIndustry.
Each RO booster pump is given 100% quality inspections including High voltage test, working flow rate, open flow rate, inlet pressure test, outlet pressure test, water-leakage test, self-priming test, and motor sound test. A Brushless RO Booster Pump increases water pressure and improves the flow rate. The LEFOO pump pictured below has a sensing device that helps manage and maintain a level of pressure.
If you want to know more kinds of differential pressure sensor hvac, please visit our website.
在线联系供应商
Other supplier products
 |
Lefoo Low Differential Pressure Transmitter LFM108 | Low differential pressure transmitters and low cost pressure sensorcontroller of LEFOO pressure control have a wide application for air-conditionin... |
 |
LEFOO 300 GPD RO PUMP | 300 GPD Pump/ Pressure Booster Pump / Self-Priming Pump Work Flow: 2.6L/min or 2.7L/min Work Pressure: 0.5Mpa=70Psi Noise Level: ≦53db / ≦55db ... |
 |
LEFOO FLAT FILM PRESSURE SENSOR | Diaphragm Pressure Transmitter Pressure Type: Guage/ Absolute Diffusion silicon core + 316L thin diaphragm Pressure Accuracy：0.25%FSO / 0.5% FSO... |
 |
RO BOOSTER PUMP | This Pump booster series is powered by ferrite magnetic motor, 0.5/0.7 Mpa pressure feeding,43~60db noise level, adjustable pressure, Workflow 0.6~... |
 |
Lefoo 115VAC RO Diaphragm Booster Pump | Low vibration and low noise, self-priming and stable pressure feeding, LEFOO 115VAC RO Diaphragm booster pump are ideal for indoor RO system applic... |
Same products
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
新款 YHCB 系列可移动卧式圆弧齿轮输油泵 | 卖方: 河北盛辉泵业 | YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要... |
 |
便携式WCB系列不锈钢高粘度柴油齿轮输送泵 | 卖方: 河北盛辉泵业 | WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，... |
 |
库存 ZYB 系列不锈钢废重油输送高压齿轮泵 | 卖方: 河北盛辉泵业 | ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用... |
