C350-1.4 Series High Flow Multi-Stage Centrifugal Blower/Centrifugal Blower
Greentech International (Zhangqiu) Co., Ltdis the professional blower supplier.Multistage Centrifugal Blower has the advantage that capacity is easy removed, sois widely used in sewage waste water treatment, metal, chemical etc.
The profile curve of rotor is advanced, As a result, the effciency of blower is up to 80%.
The profile curve of rotor is advanced, As a result, the effciency of blower is up to 80%.
Integrated welded horizontal split type is applied to casing and return channel; which makes the blower lighter and
simple.As far as weight, only 1/3-1/2 of other similar product.
Casting aluminum alloy is adopted to impeller.After strict dynamic balance,low vibration,low noise, longworking life and
high reliability is attained.
The structure is advanced.Easy-worn parts are few.Installation, operation and maintenace is convenient.
Adjusting capacity is convenient At the specified pressure, the blower has the wide range of capacity, so it can be
appliedinvariedconditions.
The blower is attached with anchor bolts, coupling and protective cover.
Motor, electric controler, bend pipe,flexible connectiong,suction and discharge silencer, the common base of moter,
filter, non-return valve, relief valve, adjustable calve and noise insulator are supplied.
Special requirements, if any, please contact with our technique department.
在线联系供应商
Other supplier products
 |
Lz90 Air SuspeLz90 Air Suspension Centrifugal Blower/Air Bearingsnsion Centrifugal Blower/Air Bearings | Air Suspension Bearing:Air suspension bearings use air buoyancy instead of lubricating oil, and use the surrounding air instead of lubricating oil,... |
 |
2BE3620 Liquid Ring Vacuum Pump/ Liquid Ring Vacuum Pump Stainless | 2BE3620Liquid Ring Vacuum PumpThe application range and characteristics:2BE3 series liquid ring vacuum pumps and compressors are designed and manuf... |
 |
C100-1.8A Multistage Centrifugal Blower/Centrifugal Blower | Greentech International (Zhangqiu) Co., Ltd is the professional blower supplier. Multistage Centrifugal Blower has the advantage that capacity is e... |
 |
4rb 210-0ah16Greentech International (Zhangqiu) Co., Ltd is the professional side channel blower supplier. The impellers in the G_series machines are mounted directly on the motor shaft for noncontact | Greentech International (Zhangqiu) Co., Ltd is the professional side channel blower supplier.The impellers in the G_series machines are mounted dir... |
 |
Lz037b40 Maglev Turbo Blower/Energy Saving/Fan | constituent:The impeller of magnetic suspension centrifugal fan is driven by direct connection between AL7075 impeller and motor. The efficiency of... |
Same products
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
OEM 定制卧式 LB 系列冰箱润滑油齿轮泵 | 卖方: 河北盛辉泵业 | LB 系列冷冻机齿轮泵适用于输送粘度在 200°E （1500mpa.s）以下，无固体颗粒杂质，温度不高于 120° 的各种机械油、透平油及其它性质相近，性能平稳的介质。该设备结... |
 |
新款 YHCB 系列可移动卧式圆弧齿轮输油泵 | 卖方: 河北盛辉泵业 | YHCB 系列圆弧齿轮泵专为输送高粘度流体（如油、树脂和化学溶液）而设计。这些泵广泛应用于需要精确可靠地处理流体的行业，包括石化、食品加工和制药行业。它们设计坚固、流量控制精确、易于维护，是需要... |
 |
便携式WCB系列不锈钢高粘度柴油齿轮输送泵 | 卖方: 河北盛辉泵业 | WCB齿轮油泵重量轻，体积小，携带移动方便。结构采用联轴器与介质隔离，联轴器单独润滑，齿轮采用合金钢，采用特殊的热加工工艺，表面硬度可达HRC60以上，耐磨性强，使用寿命长。与其它普通型泵相比，... |
 |
库存 ZYB 系列不锈钢废重油输送高压齿轮泵 | 卖方: 河北盛辉泵业 | ZYB系列废油泵用于抽送温度不高于200℃，粘度不大于150mm2/S含有非金属杂质的重油、柴油、煤焦油及粮油、化工、建材、日化等产品中的杂质。本机采用自密封润滑设计，间隙自动调整结构，零件采用... |
