300X Non-Surge Check Valve, Cast iron, Ductile iron, WCB
ChinaNon-Surge Check Valve ManufacturerShinjo Supplies 300X Non-Surge Check Valve, Cast iron, Ductile iron, WCB.
Overview
300X Non-Surge Check Valve closes automatically in case of prevent mediums back-flow. The Non-Surge Check Valve allows flow when inlet pressure in higher than the outlet pressure.
The valve has the principal of slow-open, quick-close and slow-close into one to prevent water hammering when the pump starts or closes. Non-Surge Check Valve opens and closes at controlled speed to ensure smooth flow.
Used on the pump outlet of a water supply system to prevent mediums back-flow, water hammer and water shock. It has three functions as an electric valve, check valve and water hammer remover.
It is capable of improving the safety and reliability of the water supply system effectively through integrating the technical principle of slow-open, speed valve, slow-close, and removing water hammer and preventing of both pump-starting and pump-stopping water hammer.
The gate can carry out open-close automatically upon the operation rules of the water pump just by operating the pump to open or close electrically. Hydraulic Check Valves features by the big flow and small pressure loss, reliable sealing performance, easy installation, debugging and maintenance and long duration.
Notes:
Size below DN 450 is Diaphragm type valve
Size equal and above DN 500 is piston type valve
The valve has the principal of slow-open, quick-close and slow-close into one to prevent water hammering when the pump starts or closes. Non-Surge Check Valve opens and closes at controlled speed to ensure smooth flow.
Used on the pump outlet of a water supply system to prevent mediums back-flow, water hammer and water shock. It has three functions as an electric valve, check valve and water hammer remover.
It is capable of improving the safety and reliability of the water supply system effectively through integrating the technical principle of slow-open, speed valve, slow-close, and removing water hammer and preventing of both pump-starting and pump-stopping water hammer.
The gate can carry out open-close automatically upon the operation rules of the water pump just by operating the pump to open or close electrically. Hydraulic Check Valves features by the big flow and small pressure loss, reliable sealing performance, easy installation, debugging and maintenance and long duration.
Notes:
Size below DN 450 is Diaphragm type valve
Size equal and above DN 500 is piston type valve
在线联系供应商
Other supplier products
 |
API 602 Forged Swing/Lift Flanged Check Valve, 1/2-2 Inch | ChinaAPI 602 Forged Swing/Piston Check ValveManufacturer Shinjo Supplies API 602 Forged Swing/Lift Flanged Check Valve, 1/2-2 Inch, A105, A182 F22,... |
 |
LF2 3PCS Carbon Steel Ball Valve Class 800/1500/2500 | China LF2 3PCS Carbon Steel Ball ValveManufacturer Shinjo Supplies LF2 3PCS Carbon Steel Ball Valve, Class 800/1500/2500, Threaded, SW, BW Ends.Fea... |
 |
M3 1000 PSI Two-Piece PTFE Seat Cast Floating WOG Ball Valves | China Two-PiecePTFE Seat Ball Valves Manufacturer Shinjo Supplies Two-Piece PTFE Seat Ball Valves, M3, 1000 PSI, Blow-Out Proof Stem, Cast, Floati... |
 |
Orbit Plug Valve (Double block & bleed valve), Class 150-1500 LB | ChinaOrbit Plug Valve ManufacturerShinjo Supplies Orbit Plug Valve (Double block & bleed valve), Class 150-1500 LB. Introduction Double block &... |
 |
Flanged RP-6 Steam Pressure Reducing Valve (PRV), WCB | China Flanged Steam Pressure Reducing Valve ManufacturerShinjo Supplies Flanged Steam Pressure Reducing Valve, WCB Valve Body, Bonnet, Bottom Cap.P... |
