WORM GEAR OPERATED WAFER BUTTERFLY VALVE
worm-gear-operated-wafer-butterfly-valve Features
24 months guarantee
Zero Leakage
Bi-Directional
Low Torque,long life cycle
360°polished disc assures positive on-off
Epoxy coated body,smooth surface
Various kinds of materials,applicable to different medium
Adoptive Standards
Valve Design: API 609, MSS SP-67
Face To Face: API 609, MSS SP-67, DIN3202, BS EN558-1
Pressure Test: API 598
Flange Drilling: ANSI B16.1 class125, BS4504 PN10/PN16, DIN2501 PN10/PN16
Top Flange: ISO5211
Product Advantage
1、The length of the short structure can save raw materials and installation space, and also effectively support the strength of the pipeline
2、The valve block is the correct movement of the gate, extrusion fast, to ensure effective sealing valve
3、Triangle support material, guarantee the required mechanical properties
4、According to different working conditions demand design V, triangle, or five corners and other ports, in order to meet the needs of various flow regulation
5、No groove at the bottom to make sure no slag and full bore flow
6、BKVALVE strict implementation of the API598 experimental standard, for each product to implement 100% positive and negative double pressure test, guarantee delivery to customers is 100% qualified products
7、BKVALVE dedicated to the dedication of the valve for 15 years, with professional production, sales, research and after-sales team,we are your strong backing.
Standard Test
Body Test: 1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test.
Seat Test: 1.1 times the working pressure with water.
Function / Operation Test: At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete operating test (Open/Close). This test carried out without pressure and at ambient temperature. It ensures the correct operation of the valve / actuator assembly with accessories such as solenoid valve, limit switches, air filter regulator etc.
在线联系供应商
Other supplier products
 |
ANSI 150 WAFER KNIFE GATE VALVE WITH SS KNIFE | Size Range: DN50-450 Pressure: 150LB Body Materials: WCB/Cast Iron Seat Materials:WCB/Cast Iron Disc Materials:WCB/Cast Iron Stem Materials:WC... |
 |
PNEUMATIC STAINLESS STEEL KNIFE GATE VALVE | Size Range: 2-24" (50-600mm) Pressure: 150psi (10bar) Body Materials: Seat Materials: Disc Materials: Stem Materials: Introduction The B... |
 |
REDUCER ECCENTTRIC FLANGE BUTTERFLY VALVE | reducer eccentric flange butterfly valve Features 24 months guarantee Zero Leakage Bi-Directional Low Torque,long life cycle 360°polished ... |
 |
BS5163/GB RISING STEM WEDGE GATE VALVE | Size Range: DN50-DN800 Pressure: PN1.0-1.6MPa Body Materials: Seat Materials: Disc Materials: Stem Materials: Introduction BS5163/GB Rin... |
 |
DIN 3352 F4 resilient seated flanged gate valves | Size Range: DN40-DN300 Pressure: Body Materials: ductile iron Seat Materials: Disc Materials: Stem Materials: Introduction Product intro... |
Same products
 |
Class 300 Valve | 卖方: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | 卖方: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
 |
Class 1500 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ... |
