Pressure Relief(Sustaining) Valve
Basic informationThis sustaining valveis opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in the water supply pipeline exceeds the set pressure of pressure relief. The valve closes automatically when pressure drops to the set value.Features1. Accurate Pressure Control2. Fast Opening to Maintain Line Pressure3. Slow Closing to Prevents Surges4. Completely Automatic OperationPrincipleInlet pressure water enters the lower cavity of the pilot valve diaphragm from the guide valve when the pressure in the pipeline exceeds the set pressure of the guide valve to make its pressure increase to open the guide valve, the main valve control room outwards drain under the effect of the inlet pressure water to open the main valve, it starts to discharge pressure. When the pressure in the pipeline drops to the set pressure, the pressure in the lower cavity of the guide valve diaphragm decreases, causing the guide valve closed. This results in increased water pressure from the guide pipe to the pilot valve, then to the main valve control room. The main valve plate closes and begins to hold pressure.Installation and CommissioningThe pressure relief(sustaining) valve supports horizontal and vertical installation but should pay attention to the inlet and outlet direction of valve body water when installing. In general, one fire water supply system can only install one pressure relief valve. Within the operating pressure range of the spring specified in the nameplate, the opening pressure can be adjusted by rotating the adjusting screw to change the spring compression amount. For specific use, please consult ZECO Valve Group.Product Scope, Standards & MaterialsSize Range: 2"~24"Pressure Rating: 10bar ~ 25barFace to Face Dimensions: AMSE B16.10, EN558-1Flange End Dimension: AMSE B16.1/16.42, AS4087, EN1092-2Coating: Fusion Bonded Epoxy CoatingInspection and Test: ISO 5208 / EN 12226-2
Zheng fengis one of the most professional water gate valve manufacturers and we have been devoted to produce China control valvefor many years. If you want to know more details or want a quotation, just feel free to contact us!
在线联系供应商
Other supplier products
 |
6 Inch Gate Valve | Description of 6 Inch Gate Valve: All casting and forged parts of ZECO 6 inch flanged gate valve, especially the body and cover two of the main pr... |
 |
Backflow Preventers | Basic informationThis big dirt separatorvalve is used for water purification.Features1. Easy to operate；2. No water stop is required to clean the c... |
 |
6 Inch Butterfly Valve | Description of 6 Inch Butterfly Valve: As a valve company, ZECO provides detailed installation instructions to ensure high performance and long se... |
 |
Backflow Preventers | Basic informationThis sustainingvalveis opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in th... |
 |
6 Inch Ball Valve | Description of 6 Inch Ball Valve: ZECO Valve Group is a well-known ball valve manufacturer in China.Since its establishment in 1991, it has been p... |
Same products
 |
API 6A FC Slab Gate Valve | 卖方: China JSC Valve Manufacturer Group Co., Ltd. | FC gate valve adopts a non-rising stem, slab gate, full-size conduit design, floating slab gate a... |
 |
API 599 Lubricated Plug Valve | 卖方: China JSC Valve Manufacturer Group Co., Ltd. | Full Bore Metal Seated Lubricated Plug ValveProduct description: Pressure balance, lubricated, fu... |
 |
Pneumatic Actuated Butterfly Valve | 卖方: China JSC Valve Manufacturer Group Co., Ltd. | Pneumatic Actuated High Performance Butterfly ValveValve description:High performance butterfly v... |
 |
Uni-directional Butterfly Valve | 卖方: China JSC Valve Manufacturer Group Co., Ltd. | Triple Eccentric Butterfly ValveProduct Description: Butterfly valve, triple eccentric, three off... |
 |
Double Eccentric Butterfly Valve | 卖方: China JSC Valve Manufacturer Group Co., Ltd. | High Performance Butterfly ValveProduct Description: High performance Butterfly valve, double ecc... |
