Water Heater Valve

Water Heater Valve

Theis used for automatic control of hot water and other viscosity ≤28cst in the liquid medium pipeline, it can automatically open or close the valve after receiving the electric control signal, to achieve on/off or flow regulation control of the fluid medium in the pipeline, so as to the system temperature, flow, pressure and other parameters for automatic regulation or remote control.

The is in the gas water heater, its role is to open or repeatedly close the gas pipeline is to prevent water pressure is not enough in the case of the hot water system will dry burning, control solenoid valve 100 is water pressure flow sensor, water pressure is not enough when it will not be connected to the solenoid valve degree of power, the solenoid valve will not open, igniter can not fire.

Water and gas linkage device includes a water control device and an air control device. The principle of operation is to start the gas mechanical switch (straw hat pad), start the circuit (generally a microswitch), and then start the motor, pulse igniter, and electromagnetic valve when sufficient impact water pressure is detected.

Water and gas linkage device (commonly known as water and gas linkage valve) includes water control device and air control device, the main components are air inlet, pressure relief valve stem, conical tube, eardrum, water temperature control valve, pushrod, micro switch, fire control valve, electromagnetic valve, air inlet, etc.

Water control, air control device

Working principle of water - gas linkage

The function of the water-gas linkage device is to ensure that the gas control valve can be opened only when the water pressure is sufficient and the heat exchanger is introduced to flow. When the water flow stops or the pressure is insufficient, the gas supply path of the gas will be cut off automatically to prevent the equipment from burning out due to lack of water, which is commonly referred to as "water to, gas to".

Working principle, in a nutshell, is to detect enough shock pressure, start the gas mechanical switch (straw mat), start-up circuit (general microswitch) and then start the motor, pulse ignitor and electromagnetic valve (gas electronic valve, attention, there are two valves on the gas, it is the request of safety, and also the mandatory national standard requirement).

Now commonly used water - gas linkage mainly has two kinds: one is the pressure type, the other is the differential pressure type.

Working principle of water - gas linkage

1. Differential pressure equation:

Using the principle of the pressure difference of water on both sides of the film, the pipeline is equipped with a throttle hole (venturi tube). When water flows through the throttle hole, the pressure difference is generated on both sides of the film, and the pressure difference is used to open and close the gas disc. Because the orifice diameter is fixed, so in unit time flow through the orifice of the more water, the water flow through the orifice is faster, according to Bernoulli principle, the pressure difference between the two sides of the orifice produced by the greater, by the stem control disc, so that the degree of valve opening is also increased. Guaranteed in the hot load range of the water heater, the temperature of the water heater to maintain the basic stability, not hot and cold. When the water valve closes and the water stops flowing, the pressure difference between the two sides of the film disappears, the disc resets under the action of the spring, cutting off the air supply to the main burner, the main burner off (at this time, if there is a small fire burner to keep the original combustion state).

Differential water - gas valve can be used in front of the standard and can be used in the rear.

Water and gas linkage valve is an important part of the connection between water and gas, should choose a good performance of the material for the waterproof film, but also from the structure of the water and gas road strictly separated, so that even if the membrane damaged water will not enter the gas pipeline.

We have many types of solenoid valves, such asr.o. solenoid valve, If you want to know more aboutsolenoid valves, please click here

Other supplier products

	Washing Machine Solenoid Valve FCD.3-1	PRODUCT DESCRIPTION Type: Series Ordering Information: Application: are mainly used in washing machine and other washing equipment. At prese...
	Water Dispenser Solenoid Valve FCD.3-148	PRODUCT DESCRIPTION Type: Series Ordering Information: Application: are mainly used in solar energy, water dispenser, instrument etc. At present, ...
	Coffee Maker Solenoid Valve FCD.3-4	FCD.3-4 PRODUCT DESCRIPTION Type: R.O.solenoid Valve Series Ordering Information: Application: is mainly used in water purifier,water dispenser et...
	Toilet Flush Valve Types	Toilet Flush Valve Types Toilet flush valve toilet flush equipment with cistern, especially the cistern outlet valve. The flushing valve includes ...
	Plastic Solenoid Valve FCD.3-158U	FCD.3-158U PRODUCT DESCRIPTION Type: Ordering Information: Application: are mainly used in water dispenser, water purifier. At present, we u...

供应产品

Same products

	Class 300 Valve	卖方: GangYe Group Co.,Ltd.	Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing...
	Class 3000 Industrial Valve	卖方: GangYe Group Co.,Ltd.	Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-...
	Class 2500 Industrial Valve	卖方: GangYe Group Co.,Ltd.	Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ...
	Class 150 Valve	卖方: GangYe Group Co.,Ltd.	globe valve class 150is a pressure rating designation defined by standards organizations, such as...
	Class 1500 Industrial Valve	卖方: GangYe Group Co.,Ltd.	A class 1500 valve made of 316 stainless steel, for instance, can sustain 248 bar of pressure at ...