Precision casting internal thread globe valve
The opening and closing part of the precision casting internal is a gate. The movement direction of theinternal thread globe valve is perpendicular to the direction of the fluid. The precision casting internal thread globe valve can only be fully opened and closed, and cannot be adjusted or throttled. The internal thread globe valve has two sealing surfaces. The two sealing surfaces of the most commonly used mode internal thread globe valve form a wedge shape. The wedge angle varies with the valve parameters, usually 50, and 2 ° 52 'when the medium temperature is not high. The internal thread globe valve of the wedge internal thread globe valve can be made as a whole, called a rigid gate; it can also be made as a internal thread globe valve that can produce a small amount of deformation to improve its manufacturability and make up for the deviation of the sealing surface angle during processing. The board is called an elastic shutter. The stainless steel internal thread globe valve material is divided into 304 stainless steel gate valve, 316 stainless steel gate valve, 321 stainless steel gate valve. The representation method is: Z41H-16P.
Investment castings for body and cap
Thread End:ANSI B2.1,BS21,ISO7/1
Pressure Rating:200PSI（PN16）
Working Temperature: -25℃ ~ +180℃ Material:CF8M,CF8,CF3M,WCB
Inspection Testing: API 598,EN 12266
Material List
|
ITEM |
PART |
MATERIAL |
QTY |
||
|
1 |
BODY |
A216-WCB |
A351-CF8 |
A351-CF8M |
1 |
|
2 |
DISC |
A216-WCB |
A351-CF8 |
A351-CF8M |
1 |
|
3 |
STEM |
A216-WCB |
A351-CF8 |
A351-CF8M |
1 |
|
4 |
CAP |
A216-WCB |
A351-CF8 |
A351-CF8M |
1 |
|
5 |
GASKET |
PTFE |
1 |
||
|
6 |
WASHER |
304 |
1 |
||
|
7 |
STEM PACKING |
304 |
1 |
||
|
8 |
RING |
304 |
1 |
||
|
9 |
GLAND |
304 |
1 |
||
|
10 |
WHEEL NUT |
304 |
1 |
||
|
11 |
PLATE |
304 |
1 |
||
|
12 |
HANDLE WHEEL |
ALUMNUM ALLOY |
1 |
||
Dimension Table
|
SIZE |
D |
L |
H |
A |
KGS |
|
|
DN6 |
1/4’’ |
10 |
55 |
79 |
65 |
|
|
DN10 |
3/8’’ |
12 |
55 |
79 |
65 |
|
|
DN15 |
1/2’’ |
15 |
67 |
79 |
65 |
|
|
DN20 |
3/4’’ |
20 |
75 |
91 |
77 |
|
|
DN25 |
1’’ |
25 |
85 |
106 |
77 |
|
|
DN32 |
1-1/4’’ |
32 |
101 |
125 |
97 |
|
|
DN40 |
1-1/2’’ |
40 |
115 |
136 |
97 |
|
|
DN50 |
2’’ |
50 |
136 |
155 |
97 |
|
More information please click .
在线联系供应商
Other supplier products
|
|
Precision casting internal thread globe valve | The opening and closing part of the precision casting internal is a gate. The movement direction of theinternal thread globe valve is perpendicul... |
 |
China wholesale 1/4~4 inch ball valve stainless steel 304 316 three way ball valve | The three-way valve can be used to control the flow of various types of fluids such as air, water, steam, various corrosive media, mud, oil, liqui... |
 |
Hot Selling Stainless steel 304 and 316 thread BSP MINI exagonal ball valve | is suitable for PN1.0 ～ 4.0MPa, working temperature -29 ～ 180 ℃ (seal ring is reinforced polytetrafluoroethylene) or -29 ～ 300 ℃ (seal ring is par... |
 |
Hot Sell Stainless Steel Camlock Quick Coupling Quick Connector | Widely used in industrial hose connection, conveying fluids of various materials, cam locking quick connector, NPT internal thread male head, can ... |
 |
Cast Iron Ball Valve with Plate or Painting or Galvanized Surface | Cast Iron Ball Valve with Plate or Painting or Galvanized Surface Cast iron: cast iron is an iron-carbon alloy containing more than 2% carbon Cast ... |
Same products
 |
阀 | 卖方: 荣腾鑫诺（天津）国际贸易有限公司 | 液压阀 |
 |
Class 300 Valve | 卖方: GangYe Group Co.,Ltd. | Class 300 valves have a pressure rating of 300 pounds per square inch (psi) or 20.7 bar, allowing... |
 |
Class 3000 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Wafer Body, Full Port Design, Flanged End Class 3000 Ball Valve. A ball valve class 3000pressure-... |
 |
Class 2500 Industrial Valve | 卖方: GangYe Group Co.,Ltd. | Class 2500 valves can be used for both on-off and throttling applications. The specific valve typ... |
 |
Class 150 Valve | 卖方: GangYe Group Co.,Ltd. | globe valve class 150is a pressure rating designation defined by standards organizations, such as... |
