Wedge Gate Valve

Description

Wedge gate valve is a linear motion, multi-turn general service valve.

Table of Contents

Gate valve Types as per Type of Closing Element

What is a Wedge Gate Valve?

Types of Wedge Gate Valve

Solid Wedge Gate Valve

Flexible Wedge Gate Valve

Applications of Wedge Gate Valves

Features of Wedge Gate Valve:

Material of Wedge Gate Valve:

ZECO Wedge Gate Valve Licence & Approvals

Gate valve Types as per Type of Closing Element

Parallel disk Gate Valve

Wedge Gate Valve

What is a Wedge Gate Valve?

ZECO wedge gate valve is one of the gate valve types. Wedge gate valves are named because the two sealing surfaces resemble wedges in the body. In general, the two wedge gate valve sealing surface and the Angle of the vertical center line of 2 ° 52 ‘, 3 ’30 °, 5 °, 8 °, and so on. Wedge gate valves can be divided into rising stem gate valve and non-rising stem gate valve according to the stem structure, and wedge gate valve and double disc gate valve according to the gate structure. ZECO is one ofprofessional flexible wedge gate valve manufacturersin China, with nearly 30 years of experience and history in the production of gate valves.

Types of Wedge Gate Valve

Solid Wedge Gate Valve

he solid, or single wedge gate valve is the most widely used and the lowest cost used-type in the process industry for oil, gas and air services. The purpose of the wedge shape is to introduce a high supplementary seating load. Solid-Wedge Gate Valve can be installed in any position, suitable for almost all fluids and practical for turbulent flow services.

In some situations, the valve cannot be reopened until the system temperature reheats the valve; this phenomenon is known as “Thermal blinding”. Wedge gate valves can be further described as inside screw or outside screw patterns. Solid wedge gate valves in waterworks industry are popular as Sluice valves.

Flexible Wedge Gate Valve

The flexible wedge is a one-piece solid disk with a cut around the perimeter. These cuts vary in size, shape, and depth. A shallow, narrow cut on the wedge perimeter gives less flexibility but retains strength. A cast-in recess or deeper and wider cut on the wedge perimeter gives more flexibility but compromises the strength.

This design improves seat alignment and offers better leak tightness. It also improved performance in situations where thermal binding possible. Flexible wedges Gate valves are used in steam systems.

Applications of Wedge Gate Valves

Suitable for general application as on/off and isolation valves, not recommended for throttling and/or regulating purposes. They have excellent resistance to earthquake, shocks, vibration, pressure & strokes and can be operated soundly between -196°C to 595°C.

Features of Wedge Gate Valve:

ZECO wedge gate valve adopts wedge type gate, because the Angle of the gate is wedge type with the vertical center line, it can be closed more and more tightly in the closing process, further ensuring the sealing effect;

ZECO wedge gate valve adopts lifting stem, which can visually see the opening or closing state of the valve from a distance and is easier to judge. The stem and gate are connected by t-groove, and the t-head of the stem is forged as a whole to ensure sufficient connection strength;

ZECO wedge gate valve is designed with a sealed design that allows replacement of the packing when fully open. This design ensures that the packing can be replaced online when it needs to be replaced if the packing is damaged, preventing personnel waste caused by disassembly of the valve;

ZECO wedge gate valve is designed with anti-collision protection on the flange surface when it leaves the factory, which can protect the convex surface connected with the pipe flange during transportation and prevent damage of the valve in collision.

Material of Wedge Gate Valve:

No	Part	Material
1	Body	ASTM A216 WCB
2	Seat Ring	ASTM A105 + 13Cr
3	Wedge	ASTM A216 WCB + 13Cr
4	Stem	ASTM A276 410
5	Bonnet Gasket	Graphite + SS304
6	Bonnet Bolt	ASTM A193 B7
7	Bonnet Nut	ASTM A194 2H
8	Bonnet	ASTM A216 WCB
9	Backseat	ASTM A182 F6a
10	Stem Packing	Reinforced Graphite
11	Handwheel	KTH330-08

ZECO Wedge Gate Valve Licence & Approvals

CERTIFICATE NAME	INSTITUTION
API 600-0351	American Petroleum Institute
API 6D-1225	American Petroleum Institute
ISO 9001:2015	TQCS INTERNATIONAL (GROUP) PTY LTD
ISO 14001:2015	TQCS INTERNATIONAL (GROUP) PTY LTD
ISO 45001:2018	TQCS INTERNATIONAL (GROUP) PTY LTD
Fire Test Certificate API 6FA	TUV SUD SERVICE GMBH
CE-2810	PRESSURE EQUIPMENT DIRECTIVE 2014/68/EU

There are many china globe valve manufacturersin China, but we are one of the best choices for you.

ZECO Valve Group is established in 1991, as an industrial valve manufacturerin Shanghai, China. We have 5 valve factories in China, which are located in Shanghai, Yancheng, and Wenzhou, which mainly produce and supply wedge gate valves, through conduit gate valves, floating ball valves, trunnion mounted ball valves, globe valves, swing check valves, swing check valves, dual plate check valves, and forged steel valves.

Other supplier products

	Control Valve	ZhengFengbalanced trim control valves are widely used in water supply and drainage control systems in the global building market. As one of the ...
	Motorized Ball Valve	As one of the china ball valve manufacturers, ZECO always adhere to exceed customer expectations,to provide customers with more international stand...
	Single Orifice Air Release Valve	Features of single orifice air release valve Can be a large amount of exhaust, improve water efficiency pump Can be a small amount of exhaust, ...
	Swing Check Valve	What is a Swing Check Valve? A Swing Check Valve is desinged to prevent the medium in the pipeline from flowing back. As pressure reaches zero, th...
	Pressure Independent Control Valve	PICV can manually adjust the set flow rate in the pipeline, and also can automatically maintain the pressure difference before and after the valve ...

供应产品

Same products

	Combination angle valve	卖方: Zhejiang Huaqi Information Technology Co., LTD	Meet our Brass Angle Ball Valve, a versatile and reliable solution for controlling fluid flow in ...
	Multifunctional hydraulic control valve	卖方: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD	Features: Size: 2"-24”(DN50-DN600) Material: Ductile iron ASTM A536, 65-45-12 Dimension:...
	Fire Protection Grooved Butterfly Valve	卖方: FLUID TECH PIPING SYSTEMS (TIANJIN) CO.,LTD	Features: Code：D81X4 Size: 2"-12”(DN50-DN300) Material: Ductile iron ASTM A536, 65-45-12...
	Dry Ash Gate Valve	卖方: China Valve Industry Co., Ltd.	The dry ash gate valve is designed for both inlet and outlet pipelines. It features...
	China factory High temperature double head bolt 2""-8UN Steam Turbine RSV N for power station	卖方: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"China factory High temperature double head bolt 2""-8UN Steam Turbine RSV N for power stationOur...