Lug Type Butterfly Valve
Lug type valvehas simple structure, small volume, light weight, and has good fluid control characteristics. Its disc is installed in the diameter direction of pipeline, so the valvescan be quickly opened and closed by rotating its disc 90 degrees.
The wafer body is easy to be connected between two pipeline flange with flange bolts, and it can be used at end in a fluid system,when installed with the seat retainer plate on the pressure side(API 609)
Lug style butterfly valvedesigned to comply with MSS SP-67, BS5155 and API 609. Compatible with GB, ANSI, DIN, BS, JIS flanges. Available in size 1½″ to 48″. Available with handles (1½″ to 12″), manual gear operators (1½″ to 48″), and electric or pneumatic actuators (1½″ to 48″). With many body/trim combinations, Lug butterfly valvecan meet your application.
Lug Type Butterfly Valve Dimensions
|
Item |
Part Name |
Materials |
|
1 |
Body |
Cast Iron: ASTM A126CL. B , DIN1691 GG25, EN 1561 EN-GJL-200; GB12226 HT200; |
|
Ductile Cast Iron: ASTM A536 65-45-12, DIN 1693 GGG40, EN1563 EN-GJS-400-15, GB12227 QT450-10; |
||
|
Stainless Steel: ASTM A351 CF8, CF8M; CF3, CF3M; |
||
|
Carbon Steel: ASTM A216 WCB |
||
|
2 |
Stem |
Zinc Plated Steel; |
|
Stainless Steel: ASTM A276 Type 316, Type 410, Type 420; ASTM A582 Type 416; |
||
|
3 |
Taper Pin |
Stainless Steel: ASTM A276 Type 304, Type 316; EN 1.4501; |
|
4 |
Seat |
NBR, EPDM, Neoprene, PTFE, Viton; |
|
5 |
Disc |
Ductile Cast Iron (Nickel plated):ASTM A536 65-45-12, DIN 1693 GGG40, EN1563 EN-GJS-400-15, GB12227 QT450-10; |
|
Stainless Steel: ASTM A351 CF8, CF8M; CF3, CF3M; EN 1.4408, 1.4469; 1.4501; |
||
|
AL-Bronze: ASTM B148 C95400; |
||
|
6 |
O-Ring |
NBR, EPDM, Neoprene, Viton; |
|
7 |
Bushing |
PTFE, Nylon, Lubricated Bronze; |
|
8 |
Key |
Carbon Steel |
Lug Type VS Wafer Type
The valve (Lug Type and Wafer Type) is made of cast iron, ductile iron, cast steel as well as stainless steel
The valve (Lug Type and Wafer Type) has low pressure, DIN PN10/16, ASTM CL125/CL150, JIS 5K/10K
Both Lug and wafer are used in a number of applications for industrial sectors that include food processing, pharmaceutical, chemical, oil, gas, water as well as wastewater management.
The wafer valve is designed to be clamped between two flanges. And the Lug valvecan be installed on the piping by threaded bolts or flanges.
Both Lug and water valvescan adjust (1/4-22.5°, 1/2-45°) and close the flow. And this two kinds can be installed with electrical actuator for more convenience.
This wafer type can be replaced by lug type in using, but the opposite is not true.
Lug Type Butterfly Valve FAQ
How Do You Install a Lug Type Butterfly Valve?
Putting the butterfly valve in the middle of the two flanges which fully welded to both ends of the pipe and locking the butterfly valve through the pipe flange with double head bolts, it should always be installed concentrically between flanges, position disk in the closed position during installation to prevent damage of disc sealing edge, Try the disc by moving it from the closed position to open and back to ensure it moves flexibly.
How Does a Lug Type Butterfly Valve Work?
Butterfly valve is a kind of valve using valve handle to open and close, the handle connects the stem ,the round disc of butterfly valve connects the stem, which rotates to drive the valve plate to open and close and regulate fluid.
What is the Construction of the Lug Type Butterfly Valve?
The constructions of the Lug type butterfly valve mainly are body, disc, stem, and seat, and its driving device.
在线联系供应商
Other supplier products
|
|
Lug Type Butterfly Valve | Lug type valvehas simple structure, small volume, light weight, and has good fluid control characteristics. Its disc is installed in the diameter d... |
 |
QSL2T-4 2PCS Ball Valve | The ball valve is composed of a valve body and a bonnet. It is called a two-piece type. The one-piece type is an integrated structure. The two-piec... |
 |
Carbon Steel Pipes | Carbon steel pipes include seamless and welded constructure. Seamless steel pipes are mainly used for liquid transport, and are applicable to trans... |
 |
ANSI Flange | A flange is a projecting disc-shaped collar or rim on an object for locating or strengthening it or for attaching it to another object. Flanges are... |
 |
JIS Flange | JIS Flangeare flanges with Dimensions as per JIS Standard, "JIS" Stands for Japanese Industrial Standard This kind of flange include lots of specif... |
