.

Stainless Steel CNC Machining Parts

Basic Info.

Trade Term: EXW,FOB,CIF.CFR

Payment Term: T/T,L/C, Western Union

Delivery Time:7-30days

Place of Origin: Ningbo, China

Stainless Steel Parts Features:

Chemical Composition

Corrosion resistance of stainless steel decreases with the increase of carbon content. Therefore, most stainless steels have low carbon content, the maximum is not more than 1.2%, and some steels have ωc (carbon content) even lower than 0.03% (eg 00Cr12 ). The main alloying element in stainless steel is Cr (chromium). The corrosion resistance of steel is only when the Cr content reaches a certain value. Therefore, stainless steel generally has a Cr (chromium) content of at least 10.5%. Stainless steel also contains elements such as Ni, Ti, Mn, N, Nb, Mo, Si, and Cu. Stainless steel machining components have the following features:

Weldability: Stainless steel machined products have good weldability. These products can be used for vessel parts, water heaters, drinking fountains, etc.

Heat resistance: Heat resistance means that stainless steel machining components can still maintain its excellent physical and mechanical properties at high temperatures.

Corrosion resistance: When the amount of chromium atoms in the steel is not less than 12.5%, the electrode potential of the steel can be abruptly changed from a negative potential to a positive electrode potential. Prevent electrochemical corrosion.

Physical properties of stainless steel machine parts compared with carbon steel

1, density

The density of carbon steel is slightly higher than that of ferritic and martensitic stainless steels and slightly lower than that of austenitic stainless steels;

2, resistivity

The resistivity is increasing in order of carbon steel, ferrite, martensitic, and austenitic stainless steels;

4, carbon steel, ferritic and martensitic stainless steel magnetic, austenitic stainless steel non-magnetic, but the cold work hardening martensitic transformation will produce magnetic, heat treatment can be used to eliminate the martensite Organize and restore its non-magnetic.

Differences in below four stainless steels

303: It is easier to turn than 304 by adding a small amount of sulfur and phosphorus.

304:The most commonly used stainless steel. Products such as: corrosion resistant containers, fittings, furniture, valves, pumps, medical equipment. The standard composition is 18% chromium plus 8% nickel. It is a non-magnetic stainless steel that cannot be changed by its heat treatment method.

316: Following 304, the second most widely used type of steel, mainly used in the food industry, watch accessories, pharmaceutical industry and surgical equipment, adding molybdenum elements to obtain a special structure against corrosion. Because it has better resistance to chloride corrosion than 304, it is also used as "marine steel". SS316 is usually used in nuclear fuel recovery devices. 18/10 grade stainless steel also generally meets this application level.

316 L: low carbon, so it is more resistant to corrosion, easy to heat treatment, products such as: chemical processing equipment, nuclear power generators, refrigerant storage tanks.

As the stainless steel parts manufacturers, we provide stainless steel machined parts.

CNC MACHINING PARTS

Together with 20 years of experience in the manufacturer of machining parts Ningbo Hewchois the professional of finished parts and components.

We can be your reliable partner for precision turned parts china, milled parts, machined parts, cold forged parts, metal stamped parts, special screws, threaded parts or any parts according to drawings, made of aluminum, brass, carbon steel, stainless steel or alloy steel.



在线联系供应商

至: Ningbo Hewcho Industrial Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

CNC ENGINEERING SERVICES
CNC ENGINEERING SERVICES CNC Numerical Control milling machine in the CNC engineering servicesis controlled by digitizing signals with an electronic meter. Numerical contr...
CNC TURNING PARTS
CNC TURNING PARTS CNC turning parts are components and workpieces with a high degree of dimensional accuracy and are produced in a wide variety of shapes and sizes....
Brass CNC Milling Parts
Brass CNC Milling Parts Basic Info. Trade Term: EXW,FOB,CIF.CFR Payment Term: T/T,L/C, Western Union Delivery Time:7-30days Place of Origin: Ningbo, China Information Abou...
Metal Sheet Stamping Brackets
Metal Sheet Stamping Brackets Basic Info. Trade Term: EXW,FOB,CIF.CFR Payment Term: T/T,L/C, Western Union Delivery Time:7-30days Place of Origin: Ningbo, China Information Abou...
cnc turning parts
cnc turning parts CNC turning parts are components and workpieces with a high degree of dimensional accuracy and are produced in a wide variety of shapes and sizes. ...
供应产品

Same products

DOOR HARDWARE
DOOR HARDWARE 卖方: RONGTAI HARDWARE PRODUCTS LIMITED Rongtai Hardware was established in 1990. It's one of the first hardware suppliersto manufacture ...
DOOR CLOSER
DOOR CLOSER 卖方: RONGTAI HARDWARE PRODUCTS LIMITED Rongtai Hardware was established in 1990. It's one of the first hardware suppliersto manufacture ...
CH-293A 3D SOFT-CLOSING HINGE
CH-293A 3D SOFT-CLOSING HINGE 卖方: RONGTAI HARDWARE PRODUCTS LIMITED Rongtai Hardware was established in 1990. It's one of the first hardware suppliersto manufacture ...
CABINET HANDLE
CABINET HANDLE 卖方: RONGTAI HARDWARE PRODUCTS LIMITED Rongtai Hardware was established in 1990. It's one of the first hardware suppliersto manufacture ...
BS-5320 HEAVY DUTY BALL BEARING DRAWER SLIDE
BS-5320 HEAVY DUTY BALL BEARING DRAWER SLIDE 卖方: RONGTAI HARDWARE PRODUCTS LIMITED Rongtai Hardware was established in 1990. It's one of the first hardware suppliersto manufacture ...