PVC 排水管生产线
HUASU Machinery designs and develops PVC pipe extrusion line especially for PVC water supply and disposal pipe.
This PVC Water Pipe Extrusion Line adopt optimized spider die with chrome-plating, ensure the melt plasticization homogenous and distribution uniform.which includes conical twin screw extruder, PVC pipe molds, vacuum calibrating water tank, water spraying cooling tank, haul-off machine, cutting machine and overturning bracket.
Conical twin-screw extruder: The extruder is equipped with forced fixed-quantity material feeding system, vacuum exhaust system ,automatic temperature control system and automatic speed control system. This structure assures accurate controlling for the material temperature, plasticization stability and greatly improving production speed. The main motor is direct convertor or frequency convertor. Motor output torque stability which can achieve step-less speed regulation.
PVC extruding molds: The material of extruding molds is high quality 40Cr and the molds surface is dealt with polishing and chrome plating. It adopts the structure of multiple head spiral. as the melt has low pressure,The die head still maintain low temperature at high extruding speed.
Vacuum calibrating water tank: The material of body is high hardness and good quality stainless steel board. It is high-pressure resistance, corrosion-resistance and two-stage for large diameter pipe. Stainless steel float adjusts water level and the structure simple and practical. Electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjusted three dimensions. The moving from front to back adopt cycloid reducer drive and up & down and left & right adopt screw adjustment.
Haul-off machine: It adopts frequency conversion approach. Every traction frame transfers with chain which ensures every track moving simultaneously. It is pneumatic flexibility clamping. The bearing has special structure which can effectively reduce the installation error. The machine has V type high friction coefficient rubber.
Cutting machine: It is planetary cutting for large diameter. The blade takes rotation and cutting part and inserting blade part take revolution. It has angle cutting structure, pneumatic aluminum half clamping and cleaning device.
Water spray cooling tank: Equipped Stainless steel Vacuum calibration sleeve with water lubrication ring, twin-chamber vacuum tank with spraying cooling and semicircular Nylon support, to ensure fast calibration, increase the production capacity and lower the operation. Stainless steel float adjusts water level and electricity controls water temperature. The nozzle material is ABS engineering plastic. The frame of the machine can be adjusted up and down. There is roller in the tank.These designs are especially good for big diameter pipe production and high speed production.
Control system: We can offer Siemens PLC controlling system which is intelligent controlling system. Also we can offer ordinary controlling system which use Siemens electrical parts, Omron temperature controller. Operation is simple.
在线联系供应商
Other supplier products
 |
PPR 管材生产线 | Внедрение линия для производства PPR труб: диаметр трубы: （OD）￠20-￠160 способность производственной линии： По требованию рынка компания ХУАСУ пе... |
 |
PVC钢丝增强软管 | PVC钢丝管是以PVC为基材，内嵌钢丝骨架的透明无毒软管，使用温度-10℃～65℃，该产品质轻、透明、耐候性佳、弯曲半径小、耐负压。 本套机组广泛采用了国外技术，结合多年实际生产经验，不断创新改造，经精心设计，设备性能稳定，连续生产能力强，成品率高，经济效益好。 PVC钢丝增强软管生产线主... |
 |
PVC纤维增强软管 | Внедрение Линия для производства армированных шлангов PVC волокном: Данная линия предназначена для производства шланга шланга PVC с армированным в... |
 |
HDPE通信管材 | HDPE通讯管材生产线是一种内壁带有硅胶质的永久性固体润滑剂的新型复合管，高强度，高韧性，耐腐蚀，长寿命，密封性好，工程造价低，广泛运用于高速公路，铁路等的光电缆网络系统。该生产线包括单螺杆挤出机，挤出机头，真空定径箱，牵引机，切割机和生产线控制系统。 |
 |
铝塑复合管生产线 | 铝塑复合管适用于地下热水供应管，具有较好的保温性能，耐腐蚀性能。因内壁光滑，对流体阻力很小；又因为可随意弯曲，所以安装施工方便。青岛华塑机械制造有限公司自行研制生产的铝塑复合管设备，设计独特，性能稳定，可以持续高效的生产多种规格的铝塑复合管。 该生产线包括单螺杆挤 |
