Corrosion Resistant Disc Springs
Corrosion Resistant Disc Springs
Corrosion Resistant Disc Springs,made of stainless steel, such as SUS301, SUS302, SUS316, 17-4PH, 17-7PH, 15-7Mo, their resistant to corrosion is higher than general Disc Springsmade of spring steel, so they also be known as "Stainless Steel Disc Springs". Stainless Steel Disc Springs are also widelyused in National Defense, Metallurgy, Petrochemical, Wind Power, Engineering, Food Processing Equipment, etc.
In addition to Stainless Steel Disc Springs,High Temperature Disc Springs,Cryogenic Disc Springsare suitable for high temperature or Cryogenic applications, you can choose according to the application requirement.
Corrosion Resistant Disc springs manufacturerare designed & manufactured according to DIN2092 & DIN2093, GB/T 1972-2005, and ISO 19690. The engineers of HEGONG SPRING ® are pleased to design the springs for the specific applications together with the customer’s R&D department. Be free to contact with our engineers.
Cryogenic Disc SpringsMaterial:
301
SUS301is corrosion resistant material. The strength of such material is obtained by cold rolling, so maximum material thickness is 3mm. Cold rolling will also give the spring some magnetic properties. Situation for SUS301 is soft, Half hard, 3/4 hardness, and full hard.
304
SUS304is corrosion resistant material. The content of C% is lower than SUS301, low hardness, non-magnetic, good elasticity, and good cold processing effect. Its Corrosion resistance is better than SUS301. And maximum material thickness is 3mm.
316
SUS316is corrosion resistant material. Because of Mo%, the corrosion resistance of SUS316 is better than SUS304. But tensile strength is lower than SUS301 and SUS304. Because of High Ni %, the corrosion and temperature resistance of SUS316L is better than SUS316. And maximum material thickness is 3mm.
17-4PH
17-4PHis a martensitic precipitation hardening stainless steel. Because the strength can be obtained by aging treatment, so its material thickness can reach 3mm and above. It can work under- 200 degrees.
17-7PH
17-7PHis austenitic-martensitic precipitation hardening stainless steel. The strength of such material is obtained by work hardening and precipitation hardening. Its Corrosion resistance is higher than 17-4PH. And its material thickness can reach 3mm and above.
15-7PH
15-7PHis precipitation hardening stainless steel. Because of Mo%, its corrosion resistance is better than 17-7PH. However, Corrosion resistance of such precipitation-hardening stainless steels, such as 17-4PH, 17-7PH, and 15-7PH is worse than austenitic material such as SUS301, 304, and 316. But its thickness can reach 3mm and above.
Surface Condition And Corrosion Protection:
Common surface treatment for Hegong Corrosion Resistant Disc Springsis Polish.
Tolerance:
Learn more about Tolerance
The Tolerance is according to DIN2093 standards
Specification:
HEGONG®Corrosion Resistant Disc Springsouter diameter from 6mm up to 600mm and thickness from 0.2mm up to 24mm;
Please visit our websiteto learn more.
在线联系供应商
Other supplier products
 |
High Temperature Disc Springs | High Temperature Disc Springs High Temperature Disc Springs made of high temperature(Cryogenic) resistant material as Inconel 718 , 750 , Nimonic 9... |
 |
Disc Springs for Valves | Disc Springs for Valves Disc Springs for Valves, also be known asBelleville Springs for Valves, Belleville Washers for Valves... Disc springs are w... |
 |
Flange Washers | Flange Washers Flange Washers also be known as"Flange Bolting Washers", "Spring Washers", be used forthe connection between flangeandbolt. Its appl... |
 |
Wave Springs | Wave Springs Wave springs also are known as "wave spring washers" are round elastic parts with several sine waves on the metal foil ring. There are... |
 |
Volute Springs | Volute Springs Volute springs, designed&manufactured according to JB/T11698-2013 standard (SHANGHAI HEGONGparticipated in drafting the standard... |
Same products
 |
第二十四届广州国际弹簧工业展览会 | 卖方: 广州巨浪展览策划有限公司 | 2024年广州巨浪国际金属暨冶金工业展览会 第二十四届广州国际弹簧工业展览会 邀 请 函 ... |
 |
Flat Compression Spring | 卖方: ningbo atlas metal hardware co ltd | We offer a comprehensive range of flat wire compression springswhich is known its superior qualit... |
 |
Fan Shaft | 卖方: ningbo atlas metal hardware co ltd | Atlas metal believes that fan shafts are the most important part of most electric motors. The ele... |
 |
Fan Motor Shaft | 卖方: ningbo atlas metal hardware co ltd | Atlas metal has rich experiences with electric fan shafting. We have a big production capacity to... |
 |
Extension Spring with Hooks | 卖方: ningbo atlas metal hardware co ltd | Extension springs are normally attached at both ends to other components and when these component... |
