.

CVD HTHP Synthetic Diamond Plate

CVDdiamondisdiamondproducedinanartificialprocess,asopposedtonaturaldiamonds,whicharecreatedbygeologicalprocesses.CVD diamond is used for ultra precision cutting tools (such as CVD indexable inserts, CVD boring tools, CVD reamers, CVD milling tools and other non-stand tools ).

The specification of CVD diamond plates :

Model

length * width * thickness (mm)

CVD diamond plate

1 * 1 * 1

2 * 2 * 1

3 * 3 * 1

4 * 4 * 1

5 * 5 * 1

6 * 6 * 1

7 * 7 * 1

8 * 8 * 1

9 * 9 * 1

10 * 10 * 1

11* 11 * 1

12 * 12 * 1

Thickness of CVD diamond plate from 0.3mm to 3mm

WeCan provide (100) (110) (111) threecrystalorientation

Customized Sape and Size are Available

Advantages of CVD diamond:

High transmission,Good Thermal stability and chemical stability.. It is the best replacement of natural diamond .

CVD diamond has low surface roughness and good cutting edge compared to PCD tools.

CVD diamond has higher wear resistance than PCD and other diamond materials.

The thermal conductivity of CVD diamond is 50% higher than PCD.

Good hardness and long life exceed HPHT and natural diamond.

Applications of CVD diamond:

CVD diamond is used for semi-finishing, finishing, super finishing and continuous cutting of ultra precision cutting tools.

For Manufacturing a scalpel, ultra-thin medical tools such as biological section;

for processing mirror and rocket navigation gyroscope, computer hard disk substrate, electron accelerator ultra-precision mirror parts, etc

In addition, the CVD diamond is also used for other high-tech applications (such as diamond dresser, wire drawing die, electronics ,optical window, heat spreader and gem stone industry, etc)

Manufacturing a scalpel, ultra-thin medical tools such as biological section;

Note:1, diamond has the brittleness, it is easy to produce cracks or debris after a certain impact, it is important to prevent the impact in the process of installation and use2, When the air's temperature over 850 ℃,the surface of diamond will have acarbonation reaction3, in normal temperature environment is not suitable for cutting ferrous metals (iron, cobalt, nickel, manganese, chromium), except a protective gas cutting environment.

-CVD Character:- Melting point(℃):3800-HV HARDNESS(MPa):80000-Young modulus(KN/mm2):1050-The thermal expansion coefficient(10-6/K):1.3-Thermal conductivity(W/m.K):800--1800

If you need any products, do not hesitate to contact



在线联系供应商

至: More Super Hard Products Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

1A1W CBN Grinding Wheel For Internal Grinding
1A1W CBN Grinding Wheel For Internal Grinding Vitrified bonded CBN/ Borazon Grinding Wheels - Internal Grinding Featured Application: Internal GrindingFuel Injection Nozzle Bore and Seat fa...
X3000 , X5000, 10S Cerium Polishing Wheel
X3000 , X5000, 10S Cerium Polishing Wheel Details Cup-Shape BK Polishing Wheels: It Mainly Used To Replace 10S Wheel And Lifetime Is 2 Times Of 10S Wheel , Suitable For Straight Line M...
Big Rough Diamond Plate
Big Rough Diamond Plate Synthetic diamond single crystalare synthetic diamonds produced underhigh temperatureand high pressure(HTHP) conditions. We have a high quality ma...
PCBN PCD Cutting Tools Inserts
PCBN PCD Cutting Tools Inserts PCBN PCD Cutting Tools Inserts pcd inserts cutting speed in meters Specification: Shape-Master Tool Company manufactures a wide range ofPoly...
HPHT Single Crystal Synthetic Diamond
HPHT Single Crystal Synthetic Diamond HPHT Single Crystal Synthetic Diamond HPHT single crystal diamondare synthetic diamonds producedby high pressure high -temperature synthesis under ...
供应产品

Same products

Die Grinder Bits Carbide Tooling Tungsten Carbide Burrs
Die Grinder Bits Carbide Tooling Tungsten Carbide Burrs 卖方: 株洲煜杰合金材料有限公司 Die Grinder Bits Carbide Tooling Tungstencarbide burrs Carbide Burr: Carbide rotary burr is use...
3 Flutes Solid Tungsten Carbide Chamfering Milling Cutter
3 Flutes Solid Tungsten Carbide Chamfering Milling Cutter 卖方: 株洲煜杰合金材料有限公司 3 Flutes Solid Tungsten Carbide Chamfering Milling Cutter The angle of two sides:60degree,90degre...
Diamond Quick Change Discs
Diamond Quick Change Discs 卖方: 郑州瑞特金刚石砂带有限公司 Size: Φ50mm, Φ75mm Grit: 60#~800# Description ●Taking aluminium or fiberglass as backing, diamond...
Diamond & CBN Flap Wheels
Diamond & CBN Flap Wheels 卖方: 郑州瑞特金刚石砂带有限公司 Size:Diameter: 15mm~80mm, Thickness: 10mm~50mm Grit:Diamond & CBN/60#~1500# Description ●Be t...
Diamond & CBN Discs
Diamond & CBN Discs 卖方: 郑州瑞特金刚石砂带有限公司 Size:Φ10mm~600mm Grit:Diamond & CBN/40~5000# Description ●Can be fixed on electric tools...