Solid CBN full form
Solid CBN Inserts
Solid Cbn Inserts Are Used For Rough And Finish Machining Of Hard Steel ,Cast Iron And Hard Surface Workpiece.
Type: RNMN,SNMN,TNGN,CNMN,RCMN,RCMX
Application:turning Hard Steel,Cast Iron
Cubic Boron Nitride Inserts (CBN Inserts) Is A High-Performance Type Of Cutting Tool Material From A Polycrystalline Mass. CBN Is A High Hardness, High Heat Resistance Crystal Synthesized By Boron And Nitrogen Under High Temperature And High Pressure.
Applications Of Solid CBN Inserts:
Processing Workpiece: Rough And Finish Machining Of The Hard Steel ,Cast Iron And Hard Surface Workpiece.
Processing Materials: Ferrous Materials Possessing Hardness From Approximately 45 HRC As Well As Gray Cast Iron, Cr-Chilled Cast Iron And Wear Alloys On A Cobalt, Nickel Or Iron Basis.
Specification Of Solid CBN Inserts:
|
|
|||||
| Insert Type |
Dimensions |
StandardCutting Edge |
|||
| L | Ø I.C |
S | R | ||
| RNMN060400 | 6.35 | 6.35 | 4.76 | 0 | T01020 T01025 T02020 T02030 S01020 S01025 S02020 S02030 S05020 S10020 |
| RNMN090300 | 9.525 | 9.525 | 3.18 | ||
| RNMN090400 | 9.525 | 9.525 | 4.76 | ||
| RNMN120400 | 12.7 | 12.7 | 4.76 | ||
| RNMN120600 | 12.7 | 12.7 | 6.35 | ||
| RNMN120700 | 12.7 | 12.7 | 7.94 | ||
| RNMN190700 | 19.05 | 19.05 | 7.94 | ||
| RNMN201000 | 20 | 20 | 10 | ||
| RNMN251000 | 25.4 | 25.4 | 10 | ||
| RNMN251200 | 25.4 | 25.4 | 12 | ||
|
|
|||||
| Inserts Type | Dimensions | Standard Cutting Edge | |||
| L | Ø I.C | S | R | ||
| SNMN090302 | 9 | 9.525 | 3.18 | 0.2 | S02020 S05020 S10020 |
| SNMN090304 | 9 | 9.525 | 3.18 | 0.4 | |
| SNMN090306 | 9 | 9.525 | 3.18 | 0.6 | |
| SNMN090308 | 9 | 9.525 | 3.18 | 0.8 | |
| SNMN090312 | 9 | 9.525 | 3.18 | 1.2 | |
| SNMN090404 | 9 | 9.525 | 4.76 | 0.4 | |
| SNMN090408 | 9 | 9.525 | 4.76 | 0.8 | |
| SNMN090412 | 9 | 9.525 | 4.76 | 1.2 | |
| SNMN120404 | 12 | 12.7 | 4.76 | 0.4 | |
| SNMN120406 | 12 | 12.7 | 4.76 | 0.6 | |
| SNMN120408 | 12 | 12.7 | 4.76 | 0.8 | |
| SNMN120410 | 12 | 12.7 | 4.76 | 1.0 | |
| SNMN120412 | 12 | 12.7 | 4.76 | 1.2 | |
|
|
|||||
| Inserts Type | Dimensions |
Standard Cutting Edge |
|||
| L | Ø I.C | S | R | ||
| TNGN110304 | 11 | 6.35 | 3.18 | 0.4 | S01020 S02020 |
| TNGN110308 | 11 | 6.35 | 3.18 | 0.8 | |
| TNGN110312 | 11 | 6.35 | 3.18 | 1.2 | |
| TNGN160404 | 16 | 9.25 | 4.76 | 0.4 | |
| TNGN160408 | 16 | 9.25 | 4.76 | 0.8 | |
| TNGN160410 | 16 | 9.25 | 4.76 | 1.0 | |
| TNGN160412 | 16 | 9.25 | 4.76 | 1.2 | |
| Inserts Type | Dimensions |
Standard Cutting Edge |
|||
| L | Ø I.C | S | R | ||
| CNMN090404 | 9 | 9.525 | 4.76 | 0.4 | S02020 |
| CNMN090408 | 9 | 9.525 | 4.76 | 0.4 | |
| CNMN090412 | 9 | 9.525 | 4.76 | 1.2 | |
| CNMN120404 | 12 | 12.7 | 4.76 | 0.4 | |
| CNMN120408 | 12 | 12.7 | 4.76 | 0.8 | |
| CNMN120412 | 12 | 12.7 | 4.76 | 1.2 | |
| CNMN120704 | 12 | 12.7 | 7.94 | 0.4 | |
| CNMN120708 | 12 | 12.7 | 7.94 | 0.8 | |
| CNMN120712 | 12 | 12.7 | 7.94 | 1.2 | |
| CNMN120804 | 12 | 12.7 | 8.0 | 0.4 | |
| CNMN120808 | 12 | 12.7 | 8.0 | 0.8 | |
| CNMN120812 | 12 | 12.7 | 8.0 | 1.2 | |
| CNMN160708 | 16 | 15.875 | 7.94 | 0.8 | |
| CNMN160712 | 16 | 15.875 | 7.94 | 1.2 | |
| CNMN160716 | 16 | 15.875 | 7.94 | 1.6 | |
If you need any products, do not hesitate to contact
在线联系供应商
Other supplier products
 |
Back grinding wheels for thinning | back grindingWheel for inserts Siliconwafer back grinding wheelsare mainly used for the thinning and fine grinding of the silicon wafer. Cool... |
 |
X3000 , X5000, 10S Cerium Polishing Wheel | Details PDC Cutters(Polycrystalline Diamond Composite) Is Consist Of PolycrystallineDiamondLayer Sintered With Tungsten Carbide Substrate Under ... |
 |
vitrified diamond wheel rough, finish PDC cutter | Vitrified diamond grinding wheels for PCD & PCBN tools vitrified diamond grinding wheels are used for grinding PCD and PCBN tools. The g... |
 |
Diamond Wheel for grinding PDC Cutters and PDC dril bits | Diamond Wheel for grinding PDC Cutters and PDC dril bits MORESUPERHARDDiamond wheel has below advantages:1.Full sizes are available: 5”, 7&r... |
 |
Single Crystal CVD Diamond Plate | Synthetic diamond single crystalare synthetic diamonds produced underhigh temperatureand high pressure(HTHP) conditions. We have a high quality ma... |
Same products
 |
AF38M Blue Abrasive Film | 卖方: CHANGZHOU RMN ABRASIVES CO., LTD | RMC AF38M blue abrasive film can be used as Velcro and PSA disc, and also suitable for different ... |
 |
AP36M Velcro Disc | 卖方: CHANGZHOU RMN ABRASIVES CO., LTD | RMC AP36M abrasive velcro sandpaper discsimpregnated latex, flexible. Special super stearated coa... |
 |
AP36M PSA Sanding Discs | 卖方: CHANGZHOU RMN ABRASIVES CO., LTD | RMC AP36M abrasive paper PSA sanding discimpregnated latex, flexible. Special super stearated coa... |
 |
AP33M Velcro Backed Sandpaper | 卖方: CHANGZHOU RMN ABRASIVES CO., LTD | RMC AP33M velcro sanding paperroll is a special sandpaper product suitable for fast sanding. Prem... |
 |
AP33M PSA Sanding Discs | 卖方: CHANGZHOU RMN ABRASIVES CO., LTD | RMC AP33M PSA sanding discis a special sand paper product suitable for fast sanding. Premium alum... |
