Ceramic Grains

The alumina abrasive having a microcrystalline structure obtained by the gel method is called ceramic abrasive grain. Through special processing, each grain has thousands of tiny crystals. This structure brings very good self-sharpness performance of the grains, which can continuously reveal new and sharp cutting edges.

RIKEN RMC wood grain ceramicis very dense, rough, strong and sharp. When worn, the ceramic abrasive grain will produce a sharp cutting edge similar to the knife edge. Therefore, the ceramic abrasive grain will have a lower cutting temperature and lower burnt than the ordinary alumina when sanding hard to sand materials. It can be keeping sharpness for a long time with low loading. So that will bring you less total downtime and longer life.

Brief Introduction of Ceramic Abrasive Grain

Wood grain ceramic products could process into kinds of shapes, like belts, sand discs, sheets. The grains character decide that products have longer sanding life, higher cutting force and higher sanding efficiency performance.

Ceramic abrasive belts and sanding discs could bring you rapid cutting on difficult-to-sand materials such as aerospace, aerospace alloys and forged steel. The unique ability of ceramic abrasives increase production and reduces labor costs. RIKEN RMC wood grain ceramic products also have a good performance in general sanding in auto repair, steamships, and aluminum alloys.

The ceramic abrasive grain is a new abrasive with a microcrystalline structure prepared by gel sintering. It does not use the smelting method and uses Al2O3 below 5 microns. In the presence of an acid, some of the oxides is added to produce gelatin, which is made into granules. The raw material is strict, and the content of sodium oxide is less than 5%. It is characterized by non-smelting and crystallization within 3 microns.

Ceramic abrasives are hard and tough. Fine crystal shape can make Abrasives fall off regularly at different levels, make self-sharpening orderly, keep the sharpness of the whole abrasive, and have good processing effect.

Working conditions are equally important. Temperature and pressure are more important. Crystals are destroyed one by one to achieve self-sharpening.

It is first used to coat abrasives, which is 3-5 times higher than ordinary corundum (ordinary 100, zirconium corundum 207, ceramic abrasive 333).

At present, the world-famous ceramic abrasive grain manufacturer include Saint-Gobain, 3M, Tebuck , VSM and Hermes. American 3M company is called "Cubitron", and its maximum crystallization is less than 3 micron.

Norton company is called SG abrasive, its crystal form is several microns; German Hermes company is called CB abrasive, its maximum crystallization is less than 5 microns. The crystal type of CX abrasive in Japan is called 1 micron, but in fact, it is less than 3 micron.

As a professional abrasives factory, we will do our best to meet all the needs of customers.

As the first Joint-venture company in China, RMC Abrasivesis invested by Riken Corundum Japan (1935) and Luxin Investment Group China (1950).

Other supplier products

	Abrasive Belt	We have kinds of custom 8 inch sanding belts, contains aluminum oxide abrasive belts, silicon carbide coated abrasive belts, nonwoven abrasive belt...
	ABRASIVE CLOTH	After a series of treatments, raw cloth such as cotton cloth, polyester cloth, and blended fabric will have high tear strength, low ductility, diff...
	C35P WATERPROOF ABRASIVE PAPER	Riken RMC C35P water sandpaperis a waterproof abrasive paper; using imported Latex paper. It's mainly used for wet or dry sandpaper. Features of...
	YWP43 SAND PAPER ROLLS	RIKEN RMC YWP43 multi pack abrasive rollsadopt Dwt backing paper, which enables it to high tear resistance and smooth surface advantage. YWP43 uses...
	VELCRO DISC, PSA DISC	Riken and RMC, velcro sanding discs suppliers, velcro backed sanding discs or velcro backed sanding pads(commonly known as bulk hook and loop sandi...

供应产品

Same products

	Fabric thickness tester	卖方: 上海千实精密仪器	Fabric thickness tester mainly used to measure the thickness of the fabric, suitable for leather,...
	供应天然金刚石修整笔、花岗岩刻字刀、雕刻刀、玻璃切割刀	卖方: 青岛晟鑫杰金刚石工具有限公司	青岛晟鑫杰金刚石工具有限公司 专业生产天然金刚笔、砂轮修正器、金刚石砂轮刀、金刚石砂轮、等金刚石工具。因为金刚石修整器本身就是一把刀具，需保持非常锋利。使用一个磨钝了的修整工具来修整砂轮表面，会...
	Aluminum Oxide Fiber Disc	卖方: CHANGZHOU RMN ABRASIVES CO., LTD	Aluminum Oxide Fiber Disc It is strong and has durable, long sanding life, high sanding performa...
	AJ26M Abrasive Belts for Metal	卖方: CHANGZHOU RMN ABRASIVES CO., LTD	AJ26M Abrasive Belts for Metal RMC AJ26M abrasive belts for metal backing is Jwt flexible and hi...
	AJ25 Aluminium Oxide Abrasive Belts	卖方: CHANGZHOU RMN ABRASIVES CO., LTD	AJ25 Aluminium Oxide Abrasive Belts The backing cloth make anti-slip treatment with high strengt...