STAINLESS STEEL INNER THREADED1 PCS BALL VALVE
stainless steel 1 pcs ball valveFeatures
24 months guarantee
Zero Leakage
| End flange | ANSI B 16.1,EN1092,AS2129 |
| Face to Face | ANSI B 16.10 |
| Top flange | ISO 5211 |
| Normal pressure: | PN1.0/1.6MPa(150/200PSI); Class 125/150; JIS 5K 10K 16K 20K; Table D/E |
| Body: | CI/DI/WCB/ALB/CF8/CF8M |
| Disc: | DI/ALB/Rubber lined Disc/1.2501/1.4529/CF8/Hastelloy Alloy/Monel |
| Stem: | 410/416/304/431/17-4PH/316/monel |
| Seat: | NBR/Hypalon/EPDM/Neoprene/NR/Wear-Resistant EPDM/Viton/Silicon/Heat-Resistant EPDM/White EPDM/EPDM(NSF)/PTFE |
| Suitable temperature: | -10~200 |
| Medium: | Fresh water, sewage, sea water, air, vapor, food, medicine, oils, alkalis, salt etc. |
The top flange of the valves can be applied to manual , worm gear , pneumatic and electric actuator .
The dimensions of D1 and n-d are the mounting specification , which can be China standard GB , ISO standard , ANSI standard , DIN standard ,JIS standard , AS standard and BS standard .
Standard Test
Body Test: 1.5 times the working pressure with water. This test is performed after valve assembly and with disc in half position open, it is called as a body hydro test.
Seat Test: 1.1 times the working pressure with water.
Function / Operation Test: At the time of final inspection, each valve and its actuator (Flow-Control Lever / Gear / Pneumatic Actuator), under goes a complete operating test (Open/Close). This test carried out without pressure and at ambient temperature. It ensures the correct operation of the valve / actuator assembly with accessories such as solenoid valve, limit switches, air filter regulator etc.
在线联系供应商
Other supplier products
 |
PNEUMATIC WAFER BUTTERFLY VALVES | 24 months guarantee Zero Leakage Bi-Directional Low Torque,long life cycle 360°polished disc assures positive on-off Epoxy coated body,smo... |
 |
FLANGE DOUBLE ECCENTRIC BUTTERFLY VALVE | flange butterfly valveFeatures 24 months guarantee Zero Leakage Bi-Directional Low Torque,long life cycle 360°polished disc assures positi... |
 |
METAL SEAL CAST IRON WEDGE TYPE GATE VALVE | Size Range: DN50-DN800 Pressure: PN10/16 Body Materials: ductile iron Seat Materials: Disc Materials: Stem Materials: 45 Introduction Te... |
 |
STAINLESS-STEEL-FLANGED TRIPLE OFFSET BUTTERFLY VALVE | stainless-steel-flanged-triple-offset-butterfly-valve Features 24 months guarantee Zero Leakage Bi-Directional Low Torque,long life cycle 360&... |
 |
PNEUMATIC STAINLESS STEEL KNIFE GATE VALVE | Size Range: 2-24" (50-600mm) Pressure: 150psi (10bar) Body Materials: Seat Materials: Disc Materials: Stem Materials: Introduction The B... |
