TILTING CHECK VALVE

TILTING CHECK VALVE

Valve Size:DN200-DN1200Pressure Rating: PN10/16/25.Design & Manufacture: BS EN 12334Face to Face Dimension: BSEN558-2 Series 14; ISO5752-2 Series 14Ends Dimension: ISO7005-2 PN10/16/25; JIS 10K; BS10 TABLE D/E; ANSI B16.1.Test & Inspection: API598/EN12266

Features:

Leflow’sTilting disc check valve is Double Eccentric structure, normally with counterweight and hydraulic damper.

TiltingDisk Check Valves,also called butterfly check valve, is a cost-effective valve with a unique design that provides excellent tightness and minimizes water-hammering. It is designed for drinking water and other neutral liquids, and commonly installed in pumping applications to prevent backflow in the system. The opening pressure will be very low.It is mainly used for water industry, irrigation, municipal engineering, drinking water engineering and etc

Thekey benefits are as following:1.Ensures ZERO leak with the “T” section ring fixed to the outer diameter of the disc fully facing the seat surface inside the body perimeter made of stainless steel welding.2. The sealing that can be made of EPDM/NBR/VITON,which can be replaced easily on field conditions.3. Inner and outer surfaces of the valve is coated with fusion bonded epoxy.4. Low toqure can be achieved by decreasing the friction through self lubricating bushings.5. High impact resistance.6. Pressure loss is at minimum level by double shaft design.7. Counter weight allows installation of both horizontal and vertical pipes on the right and left sides of the mill, counterweight, and lever on both sides of the check valve.8. The disc opens depending on the flow rate and moves freely depending on the flow.9. With the o-rings on the bearing bushings, disc pin holes are protected against corrosion (Dry shaft).

Leflow’s tilting check valvesare designed to meet the stringent demands of industrial fluid handling applications, providing reliable flow control and protection against backflow. With their robust construction, efficient operation, and versatility, Leflow tilting check valves are a trusted choice for industries requiring secure and efficientflow management solutions.

Other supplier products

	TILTING CHECK VALVE	TILTING CHECK VALVE Valve Size:DN200-DN1200Pressure Rating: PN10/16/25.Design & Manufacture: BS EN 12334Face to Face Dimension: BSEN558-2 Seri...
	RESILIENT SEAT GATE VALVE-BS	RESILIENT SEAT GATE VALVE-BS Valve Size:DN40 – DN1200Pressure Rating: PN6,PN10,PN16,PN25Material: Cast Iron(GG25) and Ductile Iron(GGG40 and...
	METAL SEAT CAST IRON GATE VALVE-JIS	METAL SEAT CAST IRON GATE VALVE-JIS Valve Size:2” – 12”Pressure Rating: 10KMaterial: FC and FCD.Design & Manufacture:JIS B20...
	DIAPHRAGM VALVE WEIR TYPE	DIAPHRAGM VALVE WEIR TYPE Valve Size:DN15 – DN350Pressure Rating: PN10Material: Cast Iron(GG25),Ductile Iron(GGG50),WCB,CF8 and other Alloy ...
	KNIFE GATE VALVE THROUGH CONDUIT	KNIFE GATE VALVE THROUGH CONDUIT Size:DN50 – DN600Pressure Rating: PN10 and 150LBSMaterial: DI,WCB,LCB,WC1,WC6,WC9,C5,CF3,CF3M,CF8,CF8M and ...

供应产品

Same products

	How Metal Seated Ball Valves Support Pipeline Reliability	卖方: Zhejiang Naishi Valve Co.	The Metal Seated Ball Valve is designed for industrial pipeline applications where high-temperatu...
	Cast Steel Ball Valves for Reliable Pipeline Isolation	卖方: Zhejiang Naishi Valve Co.	The Cast Steel Trunnion Mounted Ball Valve is designed for reliable shut-off and flow control in ...
	Efficient Valve Technology for Modern Sanitary Products	卖方: Zhejiang Fuxin Electrical Technology Co., Ltd.	The 6V Solenoid Valve is designed for low-voltage water control in automatic faucets, sensor-oper...
	Durable Equipment for Commercial Cleaning Operations	卖方: Taizhou Feike Mechanical Technology Co., Ltd.	FEIKE High Pressure Washer is designed for industrial cleaning, vehicle washing, equipment mainte...
	Precision-Engineered Valves for Demanding Conditions	卖方: Zhejiang Naishi Valve Co.	The Cast Steel Trunnion Mounted Ball Valve is designed for high-pressure pipeline applications in...