Mini-pleat HEPA
Mini-pleat HEPAMini-pleat HEPA filters are mainly installed at the end of a 0.5μm clean room to control particulates of larger than 0.5μm in the clean room. Seals for mini-pleat HEPA filters: Dry & wet jointed EVA seal strips,Website:, dry & wet jointless PU seal strips and wet gel seals etc.Standard size & parametersModelOverall sizeL×W×D
Rated Air Flow (m3/h)Initial resistance (Pa)H13Dust holding(g)Efficiency(F6)1μm ≥60%Efficiency (F8)1μm ≥90%Efficiency (H10)0.5μm ≥85%Efficiency (H12）0.5μm ≥99.5%Efficiency (H13)0.3μm ≥99.95%Efficiency (H14)0.3μm ≥99.995%WGB610.610-70*610×610× (190)250 (220)400WGB915.610-70*915×610×701500600WGB1220.610-70*1220×610×702000800WGB1170.570-70*1170×570×701800800WGB1170.870-70*1170×870×7027001200WGB1170.1170-70*1170×1170×7036001600WGB610.610-90*610×610×901250600WGB915.610-90*915×610×901850900WGB1220.610-90*1220×610×9025001200In the Table, values given in parentheses are the initial resistance of low-resistance mini-pleat air filters, the dust holding capacity (N/A in the Table) is slightly increased
Other supplier products
|
|
|
Class A Unidirectional Flow Transport TrolleyClass A unidirectional flow transport trolley is mainly used for aseptic transfer of materials,Website... |
|
|
|
Class A Unidirectional Flow HoodClass A unidirectional flow hood is a type of air purifying equipment providing Class A unidirectional flow and thu... |
|
|
|
Deep-pleat Air FilterDeep-pleat air filter,Website:, as a conventional product, is widely applied in clean rooms and other fields that have require... |
|
|
|
Steam Filter HousingSteam pipe filter housing and PTFE steam filter pipe can form a complete set of steam filter. It is usually installed in steam ... |
|
|
|
Aseptic Transfer CompartmentLATM series aseptic transfer compartment is used for material transfer from lower class clean area to higher Class A an... |
供应产品
Same products
