Infant/Baby Resuscitator Manufacturer
Pigeon developed and manufactured lightweight and durable infant resuscitatorthat can safely inflate the baby's lungs and provide optimum oxygenation by delivering consistent PIP with each breath avoiding the risks associated with under or over inflation at uncontrolled pressures. Accept and deliver oxygen concentrations from 21% to 100% coming from a flow meter or a blender. The patient's T-Piece can connect to neonatal masks or endotracheal tubes. Infant resuscitation equipmentis intended for emergency manual resuscitation of infants in the critical care environment.
Pigeon Medicalis a baby resuscitation equipment manufacturer in China, offering various types of resuscitators for infants including artificial resuscitatorand neonatal resuscitator machine, whose products can safely inflate the baby's lung and avoid the risks associated with under or over-inflation at uncontrolled pressures. Lightweight and durable. Innovative integrated design. Precise & careful. Attractive price. Email us today to get more details!
How does an infant/baby resuscitator work?
Neonatal resuscitatoralso known as newborn resuscitation is an emergency procedure focused on supporting the approximately 10% of newborn children who do not readily begin breathing, putting them at risk of irreversible organ injury and death. Through positive airway pressure, and in severe cases chest compressions, medical personnel can often stimulate neonates to begin breathing on their own, with attendant normalization of heart rate. Infant resuscitator can deliver a more controlled and consistent peak inspiratory pressure (PIP) and positive end-expiratory pressure (PEEP), which helps to protect the newborn's lungs.
FAQs of Infant/Baby Resuscitator
QHow does T-piece resuscitation work?
A
T-piece resuscitation delivers consistent and controlled PIP and PEEP, helping to protect the lungs from injury and also establish and maintain functional residual capacity (FRC). FRC is the volume of air that remains in the lungs following a typical expiratory phase. This volume is important for keeping the lungs open post-exhalation and for ensuring adequate pulmonary gas exchange.
QWhat is the recommended patient weight?
A
Up to 10kg.
There are many respiratory equipment manufacturers, but we are one of the best choices for you.
在线联系供应商
Other supplier products
 |
High Flow Nasal Cannula (HFNC) Manufacturer | In addition to medicine treatment, respiratory support treatments such as oxygen therapy, invasive mechanical ventilation, non-invasive ventilation... |
 |
Respiratory Humidifier | What Is the Use of Humidifier in Ventilator Introducing Pigeon Medicalrespiratory humidifier machine in hospital, a combination of modern tech... |
 |
Y Connector | For most cases of respiratory therapy, the breathing circuit consist of two limbs, one is the inspiration limb and the other one is the expiration ... |
 |
Infant Bed Manufacturer | Pigeon MedicalPN-1000A infant bed has a lower center of gravity, more mass, a broader base of support and can hold a larger baby than a bassinet. E... |
 |
NPWT Device/Suction Machine | In medicine, devices are sometimes necessary to create suction. Suction may be used to clear the airway of blood, saliva, vomit, or other secretion... |
Same products
 |
Blue Non-Woven Fabric Silicone Gel Tape Roll for Scar Treatment | 卖方: Zhejiang Hangbiao Medical Supplies Co., Ltd. | Surgical Tape Factory() Blue Non-Woven Fabric Silicone Gel Tape Roll is a premium scar repair pro... |
 |
MECHANIC MEC 4K 2K 高清电子目镜相机，适用于立体显微镜 | 卖方: 深圳市维客修科技有限公司 | 描述 美卡尼克MEC 2K/2K PRO/4K高清电子目镜摄像机，可以将双目立体显微镜改装成三目显微镜。采用SONY 1/2.3"进口CMOS传感器，采用优质CMOS传感器，硬... |
 |
Fluke 15B+ 17B+ 18B+ 数字万用表电压频率测试仪 | 卖方: 深圳市维客修科技有限公司 | iFixes 10CC半透明/全透明/乳白色/浅无铅助焊膏适用于手机主板CPU BGA维修。iFixes助焊剂注射器注射焊膏焊接膏手机整理焊接耗材系列，适用于电路板纳米芯片，手机PCB， SMT... |
 |
Grey Rubber Stopper For Blood Collection Tube | 卖方: Taizhou KangLong Medical Treatment Technology Co., Ltd. | Medical Grey Rubber Stopper For Blood Collection Tube Good formulation technology guarantees... |
 |
HTT-02 Hot Tack Tester | 卖方: Cell Instruments Co., Ltd | The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren... |
