SpO2 Monitoring Sensor
APK offers a broad portfolio of SpO2 sensor, including both reusable and disposable versions for different applications and Patient categories. The principle of pulse oximetry was developed by Nihon Kohden researcher Takuo Aoyagi in the early 1970s. Pulse oximetry measures blood oxygen saturation (SpO2) non-invasively with an infrared sensor on the fingertip. Before that, the measurement of blood oxygen saturation required arterial blood sampling. Thanks to pulse oximetry, the critical parameter of SpO2 can be measured painlessly, continuously, and in real-time. If you want to find professional and reliable SpO2 sensor suppliers, look no further than APK Technology.
Reusable SpO2 Sensor
Reusable SpO2 sensors are medical devices used to measure a patient's SpO2 levels. These SpO2 sensor types are designed to be cleaned and reused multiple times, making them a cost-effective and environmentally friendly option. There are several types of reusable SpO2 sensors, each designed for specific clinical applications and patient populations. Here are some SpO2 probe types for sale:
SPO2 probe Working Principle
How is SpO2 probe working? The reusable SpO2 sensor is mainly composed of a connector, cable, and sensor.
Compatible connector (appearance varies according to specific products)
Cables
Patient end sensor (appearance varies according to specific products)
SPO2 probe Uses
Intended to be used on corresponding parameter monitors or pulse oximeters by healthcare professionals to collect and transfer the SpO2 and pulse rate signals of the patient.
Plug the sensor into the monitor and verify proper operation as described in the manual.
Select a proper contact position of the patient for the sensor, the preferred position is the index finger, alternative recommends the thumb or little finger.
Reference to the instructions as below, the patient finger must be inserted correctly to the end of the sensor.
The cable of the SpO2 sensor should be placed along the patient's dorsal side and parallel to the arm.
Spo2 Sensor Specification
Specifications of Spo2 Sensor
SpO2 Testing Range: not lower than 70%~100%SpO2
Accuracy Range: Tolerance of ±2% when 90%-100%; ±3% when 70%-89%;
Pulse Rate Testing Range: no lower than (30~245)bpm; Pulse Rate Testing Accuracy±3bpm;
Wavelength (this information is especially useful for healthcare professionals ) Class A: Red 660nm, IR 905nm, Class B: Red 660nm, IR 940nm.
Working Conditions of Spo2 Sensor
Ambient Temperature:5℃~45℃;
Relative Humidity: ≤10%~95%(Non-Condensing);
Atmospheric Pressure: 50kPa~106kPa.
Why Choose APK Technology SPO2 Sensor
For over 20 decades, APK Tech, the professional pulse oximetry sensor factory, has established itself as a pioneer in pulse oximetry, offering an extensive range of monitoring solutions. Healthcare professionals have placed their trust in the APK Tech for its unwavering commitment to delivering rapid, precise, and consistent pulse oximetry performance tailored to the diverse spectrum of patient requirements. From neonatal care to adults, APK Tech's dedication to these attributes has firmly positioned it as an esteemed leader in the field of sensor SpO2.
There are many medical accessories suppliers, but we are one of the best choices for you.
在线联系供应商
Other supplier products
Pediatric Bladder Cuff, Single Hose(Bladder 9.8x18cm, Limb cir=18~26cm) | Parameters of A-XT-02 Reusable NIBP Cuffs APK Part Number A-XT-02 Application Medical Patient Monitoring Descr... | |
A1062-EC0 Mortara Compatible Hr12 ECG Holter Cable 10-lead Cable Snap, IEC | 10 Lead ECGCable Parameters of A1062-EC0 ECG Holter Cables APK Part Number A1062-EC0 OEM Part Number N/A OE... | |
A1318-SA129PV Mindray Compatible Adult Finger Clip Sensor with 260cm Cable 6-pin | Parameters of A1318-SA129PV Reusable SpO2 MindraySensor APK Part Number A1318-SA129PV OEM Part Number N/A OEM ... | |
A1315-SA129PU Mindray Compatible Adult Soft Tip Sensor with 260cm Cable 6-pin | A1315-SA129PU Mindray Compatible Adult Soft Tip Sensor with 260cm Cable 6-pin The A1315-SA129PU is a specific type of medical sensor used in health... | |
A1411-SN01 Nihon Kohden Compatible Neonatal Disposable SpO2 Sensor with 90cm Cable DB9(9pin) | A1411-SN01 Nihon Kohden Compatible Neonatal Disposable SpO2 Sensor with 90cm Parameters of A1411-SN01 Disposable neonatal spo2 probe APK Part Numbe... |
Same products
MECHANIC MEC 4K 2K 高清电子目镜相机,适用于立体显微镜 | 卖方: 深圳市维客修科技有限公司 | 描述 美卡尼克MEC 2K/2K PRO/4K高清电子目镜摄像机,可以将双目立体显微镜改装成三目显微镜。采用SONY 1/2.3"进口CMOS传感器,采用优质CMOS传感器,硬... | |
Fluke 15B+ 17B+ 18B+ 数字万用表电压频率测试仪 | 卖方: 深圳市维客修科技有限公司 | iFixes 10CC半透明/全透明/乳白色/浅无铅助焊膏适用于手机主板CPU BGA维修。iFixes助焊剂注射器注射焊膏焊接膏手机整理焊接耗材系列,适用于电路板纳米芯片,手机PCB, SMT... | |
HTT-02 Hot Tack Tester | 卖方: Cell Instruments Co., Ltd | The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren... | |
SPC-01 Stretch Film Peeling Cling Tester | 卖方: Cell Instruments Co., Ltd | The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f... | |
FTT-01 Film Thickness Tester | 卖方: Cell Instruments Co., Ltd | The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ... |