SKC61 Nonmetal Ultrasonic detector
Purpose
Testing building foundation piles by crosshole ultrasonic wave method .
Inspecting concrete defects by ultrasonic method, such as uncompacted place, cellular hole area
Detecting concrete strength by ultrasonic-rebound combined method
Detecting concrete crack depth by ultrasonic method
Detecting the wall defects of the hole by one transmitter and two receivers
Detecting the strength performance of geotechnical investigation, rock, concrete, etc
Specification
Technology code for testing of building foundation piles JGJ106-2003
Technical specification of dynamic pile tests for highway engineering JTG/TF81-01-2004
Technology specification for inspection of concrete defects by ultrasonic method CECS 21:2000
Technical specification for detecting strength of concrete by ultrasonic-rebound combine method CECS 02:2005
Technical specification for geotechnical investigation method GB 50021-2001
Performance
Fast, precise and automatic to judge the sound parameters. Real-time wave display to assure test efficiency
Graphically display the test data, the user can view result directly.
Can connect with the test hammer directly to detect the concrete strength. The function has been applied for national patent.
Can receive signal with strong sensitivity more than 10m without defects in concrete.
The host can supply energy to transducer without external power.
Standard USB storage with big capacity
Interior lithium battery can supply working power more than 6 hours. And more than 12hours combined with external lithium battery.
Portable, small and light apparatus(1.75kg)
Extending function to test concrete thickness by impact-echo method
Professional and powerful analysis software on Windows system can output the data to Excel or word for advanced analysis.
Other supplier products
|
|
SKC61 Nonmetal Ultrasonic detector |
Purpose Testing building foundation piles by crosshole ultrasonic wave method . Inspecting concrete defects by ultrasonic method, such as uncom... |
|
|
SK-4000混凝土电阻率仪 |
检测方法：利用Wenner阵列传感器（50mm的间距）测试混凝土电阻率 测试指标：混凝土电阻率 产品用途 混凝土电阻率测定仪也叫电位检测仪（锈蚀分析仪），混凝土中钢筋的腐蚀是一个电化学过程，它产生电流使金属离解，电阻率越低，腐蚀电流流过混凝土就越容易，腐蚀的可能性就越大，因此测量混凝土的电阻率... |
|
|
DJGW-2A Scanning Rebar Locator |
The DJGW-2A apparatus is mainly used for testing concrete structure’s quality; locating the steel bar’s position and Measuring the reba... |
|
|
SK-225 concrete test hammer |
Brief introduction: The test hammer submits to standard of GB/T9138-1988 and JJG817-93 and JGJ/T23-2001. NJ-225 concrete test hammer is applied to ... |
|
|
SK-75 brick test hammer |
Brief introduction: Submit to standard of GB/T50315-2000, the instrument is applied to test light material such as brick, light bone concrete etc.
... |
供应产品
Same products
