热量计
Introduction:
GDY-1ACalorific Value Tester is designed and made as per national standards of People’s Republic of China GB/T213-2008 Test Method for Calorific Value of coal, GB/T384-1988 Test Method for Calorific Value of Petroleum Products and Calibration Regulation of People’s Republic of China JJG672-2001 Oxygen Bomb Calorimeter, as well asShanghai enterprise standard Q/YXYY 10 XRY Series Oxygen Bomb Calorimeter.
The heat capacity ofGDY-1A Oxygen Bomb Calorimeter is 14400 J/K~14500 J/K, and it is suitable to determine calorific value of combustible materials such as petroleum products without water (gasoline, jet fuels, diesel oil and fuel oils, etc.), coal, coke and paraffin, etc.
Main Technical Features:
1. GDY-1ACalorific Value Tester adopts sealed oxygen bomb. The whole structure adopts stainless steel material. The strength is enough to resist the max pressure (60~70 atmospheric pressure) when the solid burning. And it can resist the bigger pressure when liquid fuel burning.
2. The inner water cylinder is composed of stainless steel sheet.The cross section is pyriform and the capacity is 3kg. The water cylinder is equipped with electric stirrer inside. It ensures the temperature in the water cylinder uniform.
3. The external water jacket is double layer container. It filled with water when doing determination.It make the water temperature in the cylinder uniform by water jacket stirrer and form the constant temperature environment meeting the requirements of test.
Main Technical Specifications:
| 1 | Heat capacity | 14400 J/K~14500 J/K |
| 2 | Resolution | 0.001 K |
| 3 | Measurement accuracy | ± 60J/g |
| 4 | Repeatability | ≤0.2% (Grade C) |
| 5 | Pressure endurance of oxygen bomb | 20 MPa |
| 6 | Temperature measurement range | 10 °C~35 °C |
| 7 | Ambient temperature | 20±5 °C, the fluctuation is not more than 1°C during a test |
| 8 | Data saved | 31 pieces |
| 9 | Relative humidity | ≤85% |
| 10 | Power supply | AC 220V±5%, 50 Hz |
| 11 | Dimension | 600mm×460mm×430mm |
在线联系供应商
Other supplier products
 |
CT/PT分析仪 | 1.1Application of GDVA-404 Current Transformer Tester Testsforcurrenttransformer: 1)Excitationcurveandparameterstest 2)Turnsratiotest 3)Ratioandpha... |
 |
冰点测试仪 | Purpose: GD-2430 Freezing Point Tester isdesignedandmadeaccordingtotheGB/T2430,GB/T3145,SH/T0090,andtochoosedifferentconfigure,maydeterminatejetf... |
 |
GD-0702A 马歇尔电动击实仪 | GD-0702（0702A）型马歇尔电动击实仪是根据中华人民共和国交通行业标准JTG E20-2011《公路工程沥青及沥青混合料试验规程》中的T0702-2011《沥青混合料试件制作方法（击实法）》所规定的要求设计制造的，其中： 0702型为标准击实仪，适用于标准马歇尔试验、间接抗拉试验（劈裂... |
 |
GD-0193 自动润滑油氧化安定性测定器（旋转氧弹法） | 本仪器是按照中华人民共和国行业标准SH/T0193《润滑油氧化安定性测定法（旋转氧弹法）》所规定的要求设计制造的，适用于测定具有相同组成的（基础油和添加剂）新的和使用中汽轮机油的氧化安定性，也可以用来评定含有2，6-二叔丁基对甲酚的新矿物绝缘油，作为其氧化安定性的快速评定方法。 |
 |
GD-2806G 全自动沥青软化点试验器 | 本仪器是根据中华人民共和国标准GB/T 4507《石油沥青软化点测定法》、中华人民共和国行业标准JTG E20-2011《公路工程沥青及沥青混合料试验规程》中T 0606-2011《沥青软化点试验（环球法）》所规定的要求设计制造的，适用于道路石油沥青、煤沥青、液体石油沥青等各类沥青软化点的测定... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
