.

石油产品凝点测定仪

Purpose
The Automatic Solidification & Pour Point Tester is designed and made as per GB/T510 Test Methods for Solidification Point of Petroleum Products, and GB/T3535 Test Methods for Pour Point of Petroleum Products. It is suitable to determine Solidification point and pour point of transformer oil and other light oils.
Characteristics: It can fill oil, make determination and print out test data automatically. Adopt semiconductor for refrigeration, so it can make determination rapidly. It can determine Solidification point and pour point independently or at the same time. It has characteristics of LCD display, man-machine conversation, and graphic display interface.
Technical parameters
1 Power supply AC 220V±10%, 50 Hz
2 Refrigeration speed 40/10min
3 The lowest temperature -60°C
4 Repeatability for Solidification point ≤2 °C
5 Repeatability for pour point: ≤3 °C
6 Pressure of cooling water 0.5kg/cm2
7 Ambient temperature room temperature~30 °C
8 Reproducibility ±4°C

在线联系供应商

至: 重庆格纳迪机电设备有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

克利夫兰开口闪点测定仪
克利夫兰开口闪点测定仪 Reference Standard: 1. Cleveland Open Cup Methods for Flash and Fire Point of Petroleum Products 2. ASTM D92 Standard Test Method for Flas...
708多功能水分测试仪
708多功能水分测试仪 测试饮用水的TDS/pH/Ion/ORP/DO
GD-0752 湿轮磨耗仪
GD-0752 湿轮磨耗仪 本仪器是按照中华人民共和国行业标准JTG E20-2011《公路工程沥青及沥青混合料试验规程》中T0752-2011《稀浆混合料湿轮磨耗试验》规定的要求设计制造的,适用于检验成型后的稀浆封层混合料的配伍性和抗水损害能力,可与负荷轮载试验一起确定混合料的最佳沥青含量。
倾点浊点测试仪
倾点浊点测试仪 Purpose: GD-510D Pour Point Tester is designed and made as per the National Standard GB/T3535 “Test Methods for Pour Point of Petroleum Produ...
润滑油空气释放值分析仪
润滑油空气释放值分析仪 Purpose GD-0308 Lubricating Oil Air Release Value Testeris designed and made as per SH/T0308-92. It is used to determine air release value of fire ...
供应产品

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 卖方: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
Surface Performance Tester STD-FB4 - A 卖方: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A 卖方: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH 卖方: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S 卖方: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...