.

润滑油空气释放值分析仪

Purpose
GD-0308 Lubricating Oil Air Release Value Testeris designed and made as per SH/T0308-92. It is used to determine air release value of fire resistant oil, hydraulic oil, turbine oil and other petroleum products. It includes heat-resistant test tube, circulation bath, air bath, air pressure controlling system, and air release time controlling parts.
Main characteristics
1. LCD with prompt menu input;
2. Computer for temperature controlling; it is precise and accurate;
3. It can show test date, time and other parameters;
4. Reasonable design with beautiful look;
Technical parameters
1. Temperature controlling range: ambient temperature~99.9 °C;
2. Water temperature control: ±0.2 °C;
3. Air temperature: ±3 °C

在线联系供应商

至: 重庆格纳迪机电设备有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

GD-2806G 全自动沥青软化点试验器
GD-2806G 全自动沥青软化点试验器 本仪器是根据中华人民共和国标准GB/T 4507《石油沥青软化点测定法》、中华人民共和国行业标准JTG E20-2011《公路工程沥青及沥青混合料试验规程》中T 0606-2011《沥青软化点试验(环球法)》所规定的要求设计制造的,适用于道路石油沥青、煤沥青、液体石油沥青等各类沥青软化点的测定...
氧化安定性分析设备
氧化安定性分析设备 I. Summary GD-8018D Oxidation Pressure Vessel for ASTM D525 is designed and made as per the national standard of People’s Republic of China G...
克利夫兰开口闪点测定仪
克利夫兰开口闪点测定仪 Reference Standard: 1. Cleveland Open Cup Methods for Flash and Fire Point of Petroleum Products 2. ASTM D92 Standard Test Method for Flas...
GD-0624 沥青粘韧性测试仪
GD-0624 沥青粘韧性测试仪 本仪器是根据中华人民共和国行业标准 JTGE20-2011 《公路工程沥青及沥青混合料试验规程》中 T 0624-2011《沥青粘韧性试验》和石化行业标准 SH/T 0735-2003《沥青粘韧性试验法》所规定的要求设计制造的。适用于按 T 0624-2011《沥青粘韧性试验》、SH/T 07...
抗乳化性能测定仪
抗乳化性能测定仪 Purpose It is designed and made as per the National Standard GB/T7305 “Test Methods for Demulsibility Characteristics of Petroleum Oils and ...
供应产品

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 卖方: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
Surface Performance Tester STD-FB4 - A 卖方: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A 卖方: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH 卖方: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S 卖方: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...