润滑脂针入度测试仪
Purpose:
GD-2801C Needle Penetrometer is designed and made as per the National Standard GB/T 4509 “Test Methods for Needle Penetration of Petroleum Asphalt”, GB/T 269 “Test Methods for Cone Penetration of Lubricating Grease and Petroleum Grease”, and T0604 “Asphalt Penetration Test” in the Industry Standard JTJ052Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering. It is used to determine penetration of asphalt and lubricating grease.
1. Asphalt: the needle penetration of asphalt is expressed as the depth that a standard needle of 100±0.05 g vertically penetrates into a sample without any measurable friction in 5 seconds in the constant temperature bath of 25°C±0.1°C. It is to evaluate consistency of asphalt. The larger the penetration is, the less the consistency is and the softer the asphalt is.
2. Lubricating grease: the cone penetration of lubricating grease or petroleum grease is expressed as the depth that a standard cone of 150 g vertically penetrates into a sample without any measurable friction in 5 seconds in the constant temperature bath of 25°C±0.1°C. It is used to evaluate the hardness of lubricating grease or petroleum grease.
It can also be used for solid granule, powder, colloid and other materials test, as well as cream, glycine, butter, margarine cream, fermentation, and other food inspection. It has been widely used in food, highway construction and other industries.
Technical parameters:
1. Timing device: you can select 5, 8, 10, 12, 30 or 60 s. timing error is less than ±0.1 s.
2. Depth measurement device: It uses racks to drive raster for display. It is convenient, rapid, and intuitive, and it can be started at any position.
3. Penetration accuracy:±1 penetration;
4. Maximum penetration: 600 penetrations;
5. Heating power: 220 W;
6. Temperature controlling accuracy: 25±0.1°C (the ambient temperature should not be higher than 20 °C)
7. Constant temperature bath: made of harden glass;
8. Standard needle: 2.5±0.05g; as per GB/T4509, and T0604;
9. Standard cone: 102.5±0.05g; as per GB/T269;
10. Up and down holder: it can be adjusted as your requirements. It is convenient to let the needle points just contact sample surface.Related Products
- GD-2801A Penetrometer
- GD-2801E Penetrometer
- GD-2801E1 Penetrometer
- GD-2801F Low Temperature Penetrometer
- GD-2801G Penetrometer (For Wax)
- GD-2801I Automatic Penetrometer
在线联系供应商
Other supplier products
继电保护测试仪 | Simple introduction of GDJB-702D Protection Relay Testing Equipment lProvidestandard7phasessources: 4voltagesources,3currentsources lTwooperatingmo... | |
润滑脂针入度测试仪 | Purpose: GD-2801C Needle Penetrometer is designed and made as per the National Standard GB/T 4509 “Test Methods for Needle Penetration of Pe... | |
石油产品凝点测定仪 | Purpose The Automatic Solidification & Pour Point Tester is designed and made as per GB/T510 Test Methods for Solidification Point of Petroleum... | |
GD-0655 乳化沥青存储稳定性试验器 | 本仪器是按照中华人民共和国行业标准 JTG E20-2011《公路工程沥青及沥青混合料试验规程》中 T 0655-1993《乳化沥青储存稳定性试验》规定的要求设计制造的,适用于测定各类乳化沥青的储存稳定性。 | |
润滑油空气释放值分析仪 | Purpose GD-0308 Lubricating Oil Air Release Value Testeris designed and made as per SH/T0308-92. It is used to determine air release value of fire ... |
Same products
Disposable Dental Needles | 卖方: Shanghai Kohope Medical Devices Co., Ltd. | The dental needles manufacturing, also named disposable dental needles and tooth needles, are ass... | |
ULTRASONIC STEEL PIPE TESTING EQUIPMENT | 卖方: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | Ultrasonic pipe testingwith ultrasonic pipe inspection equipmentrefers to a non-destructive testi... | |
STEEL PIPE STORAGE RACK | 卖方: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | Metal Pipe Storage Racks This ms pipe storage rackmachine serves as a storage system for inspect... | |
STEEL PIPE ROTATING ROLLER TABLE | 卖方: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | This equipment is suitable for the detection and repair welding process in the production of spir... | |
STEEL PIPE END EXPANDING MACHINE | 卖方: Hebei tianxianghao metallurgical equipment manufacturing co.,ltd | Pipe expanding machineis a professional equipment for expanding and rounding the end of spiral su... |