.

Automatic cleveland open cup flash point tester

Scope of application

Color LCD, the analog trace shows a function of time warming up and test curve, automatic program sweep, automatic ignition, automatic detection, automatic atmospheric pressure correction,

Automatic fan cooling, automatic movements, automatically print the test results, the instrument self-diagnostic function, over-temperature protection measures

Function characteristics

1, Confirm to GB/T3536-2008, ASTM D93, ISO2592 standard, 2, innovation introduced the U.S. imports XECOM data processing chip, fast and accurate processing of the data; 3,automatic correction of the atmospheric pressure, smart discrimination result is valid; 4,instrument has a self-diagnostic function, automatic prompts to equipment failure; 5,instrument has self over-temperature protection, over-temperature range can be arbitrarily set; 6, color liquid crystal display, real-time simulation of real-time trace shows a function of time warming up and test curve, operator interface prompts;

Technical parameters

1 Power supply: AC 220V ± 10%, 50Hz

2,Range: room temperature ~ 400 ℃;

3, Repeatability: ≤ 4 ℃

4,Reproducibility: ≤ 6 ℃

5,Distinguish : 0.1 ℃

7, heating rate: meet GB/T3536-2008 standards;

8, Ignition: Electronic ignition, the gas flame.

9, Ambient temperature :10-40 ℃

10, Ambient humidity: <85%

11, Power consumption: less than 400W


在线联系供应商

至: Changsha Friend Experimental Analysis Instrument Co., Ltd
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Automatic closed cup flash point tester of petroleum products
Automatic closed cup flash point tester of petroleum products Scope of application Applied standards: GB/T 261-2008, ASTM D93-02 Application range: applies to the determination of flash point of petroleum prod...
 Fuel cetane number analyzer
Fuel cetane number analyzer Oil octane cetane number analyzer according to national standards GB/T11139, international standard ISO4264 and ASTM D976 designed and manufacture...
Karl fischer titrator
Karl fischer titrator Measuring compliance with octane number: ASTM D 2699-86, ASTM D 2700-86 diesel cetane measuring compliance with ASTM D4737-03, ASTM D 613, EN ISO 5...
Rapid low temperature Closed Cup Flash Point tester
Rapid low temperature Closed Cup Flash Point tester Scope of application Function characteristics 1, A color display allow for user friendly interface. 2, Model FDT-023 prompt function automatically...
 Octane number analyzer (motor / research method)
Octane number analyzer (motor / research method) Scope of application Applied to "gasoline octane machine assay (MON)" GB/T503, "gasoline octane machine assay (research)" GB/T5487, andASTM D2700, ...
供应产品

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 卖方: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
Surface Performance Tester STD-FB4 - A 卖方: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A 卖方: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH 卖方: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S 卖方: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...