Sulfur content analyzer (lamp methods)

Scope of application

Sulfur Content Analyzer(Lamp Method) is designed and madeas perthe National Standard of People’ Republic of China GB/T380 “Test Methods for Sulfur Content of Petroleum Products (Lamp Methods)”. It is suitable to determine the sulfur content of light petroleum products (gasoline, and kerosene, etc) whose vapor pressure is not more than 600 mmHgas perthe GB/T380 standard.

Function characteristics

1, glass instrument to facilitate loading and unloading.

2、Burning lamp can be adjusted up and down as needed.

3、Each gas line gas flow rate can be adjusted independently.

4、suction The sample gas after combustion, while stirring The test solution

Technical parameters

1 Model:FDR-3101 Petroleum Products Sulfur Content Tester (Lamp Method )

2 Power supply: AC 220 V ± 10%, 50 Hz

3 Quantity of the sample: take five groups independently, can do test for 4 each group independently

5 Electromagnet pump:7 independent groups

6 Vacuum magnetism adjustment: stepless regulation by a potentiometer

7 Lamp adjustment: it can be adjusted up and downs. The adjustment range should not less than 15 mm;

8 Materials: the workbench and test tube holder are made of stainless steel

9 Test tube holder: Each holder can be adjusted independently. Its adjustment range is not less than 20 mm

Other supplier products

	Octane number analyzer (motor / research method)	Scope of application Applied to "gasoline octane machine assay (MON)" GB/T503, "gasoline octane machine assay (research)" GB/T5487, andASTM D2700, ...
	Karl fischer titrator	Measuring compliance with octane number: ASTM D 2699-86, ASTM D 2700-86 diesel cetane measuring compliance with ASTM D4737-03, ASTM D 613, EN ISO 5...
	Pensky-martens closed cup flash point tester	Scope of application The instrument is designed and made as per the National Standard GB/T261 ASTM D93 ISO 2719 Test Methods for Flash Point and Fi...
	Gasoline oxidation stability teste	The instrument is designed and made as per GB/T8018, ISO5736,ASTM D525, DIN51781 Function characteristics 1,Oxidation stability analyzer, automatic...
	Engine oil apparent viscosity analyzer	Scope of application The apparent viscosity of the engine oil analyzer applicable standards: GB/T6538 ASTM D5293 The instrument is mainly the test ...

供应产品

Same products

	Air Permeability Tester STD- F8	卖方: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	卖方: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	卖方: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	卖方: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	卖方: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...