Argon Gas Purifier
Argon Gas Purifier
Overview
The high purity argon gas purifieris developed by Komic Instrument Ltd. in 2011. The purifier can purify industry argon gas (99.9% purity) to 99.9999% high purity argon gas (note: if cylinder argon purity cannot reach 99.9%, be sure to purchase argon gas with 99.99% purity). The purifier is widely used as argon supply system in spectroscopy, metallurgy, mechanic, chemical industry, atomic energy, etc.
This purifier adopts the latest imported high-temperature precious metals materials. After refinement, the purity of the industrial argon which is originally 99.9% will increase to more than 99.9999%, in which the total amount of the remainder of O2、N2、CO2、CH4、H2 is less than 1ppm with the dew point no more than ‐85℃.
This argon gas purifieris designed as the specialized equipment for the purification of industrial argon. It can also be used as terminal purifier in other technical fields whose quantity is large while asking for high purity. The equipment is applicable to direct Reading Spectrometer, ICP, mass spectrometer, Graphite Furnace Atomic Absorption Spectrometry, Chromatogram(gas phase/liquid phase), Melting furnace with argon blowing system, protection gas in silicon industry, high purity purging, etc.Argon Gas Purifier Exporter China.
Features
User-friendly design, simple installation and operation
Synthesis reactor can be regenerated repeatedly, during regeneration, high purity argon gas can be output as normal, without adding hydrogen and shutdown, the process is safe and reliable.
High purity, Synthesis reactor adopts multistage purification method including chemical catalyti reaction, physical adsorption, solid state filter , etc.
Key components adopt high quality imported fittings to ensure high quality, high purity Argon gas output. If raw argon gas meets the requirement, purity of output refined argon gas can be 99.9999%
Low failure rate, Electrical parts all endure long time aging test
|
Gas |
Purity(%) |
N2 (ppm) |
O2 (ppm) |
CO (ppm) |
CO2 (ppm) |
CH4 (ppm) |
Dew point (H2O) |
|
Crude argon |
<106 |
<15 |
<5 |
<5 |
<5 |
－65℃ |
|
|
Refined argon |
≤0.1 |
≤0.1 |
≤0.1 |
≤0.1 |
≤0.1 |
－85℃ |
在线联系供应商
Other supplier products
 |
ICP5000 Inductive Coupled Plasma (ICP) OES Spectrometer | ICP5000 Inductive Coupled Plasma (ICP) OES Spectrometer ICP-5000 is a desktop innovative Inductively Coupled Plasma Optical Emission Spectrometer(I... |
 |
M5000 Spark Optical Atomic Emission Spectroscopy | M5000 Spark Optical Atomic Emission Spectroscopy Stationary Metal Analyzers Introduction M5000spark optical atomic emission spectroscopyis a c... |
 |
M4000 Optical Emission Analyzer for Alloy Analysis | M4000 Optical Emission Analyzer for Alloy Analysis M4000 optical emission analyzerfor alloy analysis creatively combined with world leading argon c... |
 |
M4000 CCD Spark Optical Emission Spectromter | M4000 CCD Spark Optical Emission Spectromter M4000 CCD Spark Optical Emission Spectromtercreatively combined with world leading argon circulation ... |
 |
M5000 Alloy Analyzer for Positive Material Identification | M5000 Alloy Analyzer for Positive Material Identification Stationary Metal Analyzers Introduction M5000 Alloy Analyzerfor Positive Material Id... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
