.

Medical Face Mask Fire Resistance Tester

This device is mainly used to test the flame retardant performance of medical masks. The combustion performance of the mask is measured through a head mold wearing a mask de-vice to contact with the flame at a certain linear speed.

The device is mainly used in the field of medical protection, and also can also be used for
testing flame retardant properties of other textile coating materials.

GB 19083-2010Technical requirements of
medical protective masks
YY 0469-2011Technical requirements of
medical surgical masks-Blood penetration
test device
GB 2626-2006Respiratory protective products, Self - priming filtering particulates respirator-flammability
BS EN136-1998Respiratory protective de-
vices -Full face masks - Requirements testing, marking

Items Parameters
Linear velocity of head automatic movement (60±5)mm/s
Flame height 40±4mm
Flame temperature measurement Thermocouple detection
Burner height adjustment range 30mm
Metal head mold surface thickness 2~3mm,Resistance to flame combustion
Combustion timer 0~9999.9s
Accuracy ±0.1s
Power supply AC220V,50Hz,500W
Weight About 30kg
When the flame is (20±2)mm above the burner, the temperature is (800±50)℃.
distance between the top of the burner and mask lowest point is(20±2)mm.


在线联系供应商

至: 千实精密机电仪器检测设备有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Grease Rapid Extraction Analyzer
Grease Rapid Extraction Analyzer The rapid extraction of oil and oil is specially used to quickly obtain the oil content of the top and similar materials. Through the container pen...
Electric?Rubbing Colour?Fastness??Tester
Electric?Rubbing Colour?Fastness??Tester TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ...
Textile Grease Extraction Apparatus
Textile Grease Extraction Apparatus Rapid Grease Extraction Apparatus Testing Standards ofRapid Grease Extraction Apparatus:Edana method ERT 155 Applications: Rapid Grease Extracti...
Filter Tester MFP Nano Plus 4000
Filter Tester MFP Nano Plus 4000 MFP Nano Plus 40000 with U-SMPS Real-time determination of fraction separation efficiency with two UF-CPC in raw and clean gas;MFP filter test rigs...
Hydrostatic head Tester
Hydrostatic head Tester Hydrostatic Head Tester Testing Standards: GB/T 4744, AATCC 127, ERT 120-1/160-0, BS EN 20811/3321/3424, AFNOR G07-057, ISO 811, JIS L1092A, JIS L1...
供应产品

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 卖方: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
Surface Performance Tester STD-FB4 - A 卖方: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A 卖方: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH 卖方: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S 卖方: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...