RCA tape scroll abrasion Wear tester
The RCA Abrasion Wear Tester is used to test surfaces for resistance to abrasion and wear. Typically used on painted or plated organic finishes, foil, and inked key pad lettering. This tester is widely used as a standard for many silicone key pad and membrane switch manufacturers. This abrader is used as a standard to the auto, appliance, cell , plastics, and coating industries. It uses an inexpensive roll of throw away abrasion paper. All build-up error is eliminated and consistent readings are easily obtained.
The tape abrasion test machine having a number of times to reach the stop function and having breaks down function, which can reduce product testing abrasion tests error, better test for a customer to save paper
Instructions:
1, scroll uncoated paper or tape friction with the sample oil after the determination of the effect of the wear certain number of revolutions
2, for the softer material load of 55g or 175g mitigate
3, with a magnifying glass to view
4, the counter: Digital counter (Led display, 0-9999 can set the number of revolutions)
Technical Parameters:
1, the test load (g): 55g g175g 275g
2, test speed: 16 R / MIN
3, machine size: 530 * 490 * 410 (mm)
4, Machine Weight: 59kg
5, power supply: 1Φ, 220V, 5A or designated
Product Configuration:
A set of tools, a magnifying glass.;
Test load: 55g, 175g, one each;
A flat retainer;
3 O-ring. Lap tape
在线联系供应商
Other supplier products
| Antisynthetic blood penetration tester For protective clothing testing | It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test pressure. Standard... | |
| textile bursting strength tester | Standards:GB/T7742, FZ/T60019, ISO 13938.2, NEXT TEST METHOD 22 2006 ,WOOLMARK TM29 2000,EDANA 80.3-99,ISO 2758,ASTMD 3786,JISL108Scope of applicat... | |
| ICI Mace Snag Tester | ICI Mace Snag Tester Testing Standards:ASTM D3939, GB/T 11047 Applications: ICI Mace Snag Tester is designed for rapidly determining the tendency o... | |
| medical protective mask face mask flame retardant property tester | Medical mouth mask flame retardant property tester Standard: GB 19083-2010 medical protective mask technical requirements Scope: It is the specia... | |
| Fat End Type of Thread EndSuction Machine | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... |
Same products
| Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... | |
| Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... | |
| Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... | |
| Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... | |
| Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
















