.

ozone aging test chamber manufacturer

Ozone resistance test chambers test elastomers (rubber) in the condition of ozone exposure,to simulate and measure rubber aging by means of ozone within a few days.
Built with dynamic and static sample holders and others in accordance with test method of ASTM D1149, IEX, ISO1431, ASTM D1171.All models are upgrade to programmable controller and Ethernet access that provides simple operation and control.

The textile ozen aging color fastness tester is mainly used for testing color fastness properties of fabrics exposed to ozone environment; it is the special equipment for testing the fabric colorfastness to ozone.

Product Description
1. Equipped with a high efficiency ozone generator. It is also equipped with HMOS sensor, ozone concentration of 5ppm, control accuracy of ± 20%, with a durable ccounters. When the tank is full load for test, the ozone concentration can reach 5ppm in about five minutes;
2. Stainless steel test chamber is equipped with a large UV glass observation window, and can acheive closed-loop control of the ozone concentration.The rotating sample holder can hold up to 24 samples. The automatic shut-off featured LED lights improve the observance of the test effect;
3. In order to improve the safety performance of the device, it is equipped with door safety interlock,ozone decomposition catalyst and exhaust design with negative pressure monitoring;
4. The user can conduct on-site calibration each year, and the sensor can also be returned to the factory for calibration. Two calibration standards have NIST traceable calibration. The equipment also has periodic reminders to alert users to replace ozone decomposition catalyst and ozone generator.

Application
It is suitable for a series of tests on color fastness and color fastness to airborne contaminants, such as knitted fabrics, woven fabrics, synthetic fiber fabrics, natural fiber fabrics, etc. It can also be used for the ozone color fastness test of fabrics such as nylon carpet.

Standards
AATCC 109-2011 Colorfastness to Ozone in the Atmosphere under Low Humidities.
AATCC 129-2011 Colorfastness To Ozone In The Atmosphere Under High Humidities
ISO 105-G03-1993 Textiles; tests for color fastness; part G03: color fastness to ozone in the atmosphere
GB/T 11039.3-2005 Textiles; tests for color fastness; part 3: color fastness to ozone in the atmosphere
JIS L0890 Test methods for color fastness to ozone

Features
· Multi-functional rotating sample rack supports hanging and placing samples in various ways to meet the test requirements of samples in different shapes and specifications. Sample rack speed is adjustable.
· High output ozone generator with closed-loop ozone concentration control system and easy parameter setting panel provides a powerful control function and accurate test results.
· Transparent window with internal lighting system provides convenience to observe the test process. The security door lock ensures test safety.

Structure
1. The apparatus consists of an ozone generator, fans, baffles, sample holder and the sample compartment composition. The use of high-voltage transformer ozone generator discharge through the grid, the generator is placed in front of the low pressure fan, an ozone separator system injects ozone into the test chamber. Sample holder mounted on the wire can be applied to samples of various sizes.
2. The device is equipped with high-efficiency ozone generator, controller, closed-loop control of ozone concentration and can accommodate 24 rotating sample holders. The pre-set parameters can be displayed on the screen , thereby increasing the accuracy of the device operation and test results.

Technical Parameters
Items
Parameters
Temperature Range
10℃-50℃
Temp Accuracy
±1.0℃
Humidity range
50-90% RH
Humidity accuracy
±3%
Ozone concentration range
0-500pphm
Adjust method
flow regulation
Ozone generation
Static air emissions
Internal dimension
400mm x 400mm x500mm
Power supply
220V,50Hz or115,60Hz
External dimension
1000mm×650 mm×1450 mm
Weight
95KG



在线联系供应商

至: 千实精密机电仪器检测设备有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Wheeelchair Seat Back Cushion Flame Resistance Tester
Wheeelchair Seat Back Cushion Flame Resistance Tester Fire hazards exist everywhere in our daily life. In order to reduce fire accidents due to the flammability of wheelchair seat (back) cushion and th...
Hexapod Tumbler Tester
Hexapod Tumbler Tester Hexapod Tumbler Tester Standards ofHexapod Tumbler Tester: BS EN 1471: 1997,ISO 9405: 2001 IWS test methods 247 & 251,ISO 10361: 2000 (BS) Wool...
Horizontal flame test chamber
Horizontal flame test chamber The Horizontal Flammability Tester is designed for determining the comparative burn rates and burn resistance of textiles, particularly those for a...
shoe bending durability tester
shoe bending durability tester Standards: Satra TM92 & 77 The Footwear Flection Tester is supplied in both single or twin station models and the operation simulates t...
Melt Flow Indexer(MFI)
Melt Flow Indexer(MFI) IntroductionMelt flow indexer(MFI) are used for military uniforms, canvas, canvas, labor insurance products. The fabric fusing tester is designed f...
供应产品

Same products

HD EYE Borehole Camera System
HD EYE Borehole Camera System 卖方: 770450 Digital HD Borehole Camerais the second generation of borehole camera which designed by our compa...
适用于母猪、牛、羊的膝上型兽用超声凸阵探头
适用于母猪、牛、羊的膝上型兽用超声凸阵探头 卖方: 全命医疗 便携式全数字彩色多普勒 保修:2年售后服务:在线技术支持保质期:2年质量认证:CE仪器分类:II类安全标准:GB15979-2002类型:多普勒超声设备交货:收到付款后 3(三个)工作日。最小起...
双屏显示手推车兽医诊断超声扫描仪 PM-V6T
双屏显示手推车兽医诊断超声扫描仪 PM-V6T 卖方: 全命医疗 双屏超声机/推车彩色多普勒超声机/实时4D超声主要特点:显示方式1.黑白图像:B、2B、4B、右/左 B|M、B|D、右/左 PW(D)、上/下 PW(D)、M、B 模式局部放大、线性探针梯形成...
台式智能牛奶加热离心机实验室脂肪分离器 2400 rpm
台式智能牛奶加热离心机实验室脂肪分离器 2400 rpm 卖方: 全命医疗 特征: 对于脂肪净化,共有三种转子供您选择,最高转速可达2400转/分。钢体变频无刷直流电机自动平衡,带降噪系统卧式离心金属转子,氧化工艺处理,转塔转子可高温高压灭菌。离心观察孔,降噪凹盖,离心...
实验室/医院专用离心PM4S凝胶卡
实验室/医院专用离心PM4S凝胶卡 卖方: 全命医疗 特征: PM4S凝胶卡离心机是我公司技术人员经过多年研究,吸收同类产品优良优点,结合国内市场需求而设计开发的新产品。本机广泛应用于血清学、血常规检测、红细胞洗涤、微柱凝胶免疫测定等,对临床试验和...