Medical Face Mask flammability Test machine
This Medical Face Mask flammability Tester is mainly used to test the flame retardant performance of medical masks. The combustion performance of the mask is measured through a head mold wearing a mask de-vice to contact with the flame at a certain linear speed.
The device is mainly used in the field of medical protection, and also can also be used for
testing flame retardant properties of other textile coating materials.
GB 19083-2010 Technical requirements of
medical protective masks
YY 0469-2011 Technical requirements of
medical surgical masks-Blood penetration
test device
GB 2626-2006 Respiratory protective products, Self - priming filtering particulates respirator-flammability
BS EN136-1998 Respiratory protective devices -Full face masks - Requirements testing, marking
Items Parameters
Linear velocity of head automatic movement （60±5）mm/s
Flame height 40±4mm
Flame temperature measurement Thermocouple detection
Burner height adjustment range 30mm
Metal head mold surface thickness 2~3mm，Resistance to flame combustion
Combustion timer 0~9999.9s
Accuracy ±0.1s
Power supply AC220V，50Hz，500W
Weight About 30kg
When the flame is （20±2）mm above the burner, the temperature is （800±50）℃.
distance between the top of the burner and mask lowest point is（20±2）mm.
please leave your address for receiving the quotation
any need ,please contact us
在线联系供应商
Other supplier products
 |
Random tumble pilling tester | Random Tumble Pilling Tester Standards: ASTM D3512, GB/T 4802.4, ISO 12945.3, JIS L1076-D Applications: Random Tumble Pilling Tester is used to det... |
 |
carpet flammability equipment | Standards:BS 4790, ISO 6925, BS 6307Applications:The Flammability Tester is used to test the effects of a small source of ignition on floor coverin... |
|
|
Schopper Abrasion Tester | Testing Standards:DIN 53863, part 2 , GME Standard 60345, GMW Standard 3283, VW/Audi Zentral-Norm PV 3908 Applications: The Schopper Abrasion T... |
|
|
ASTM E1354 Cone Calorimeter for Building Materials | StandardsApplication ISO 5660Reaction to fire tests-Heat release, smoke production and mass loss rate.ASTM E 1354Method of test for heat and smoke... |
 |
AFC-133 Filter Material Test Bench | Technical Parameters： It’s great significant for AFC-133 filter test bench to optimize and develop filter materials, ensure quality assurance... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
