dry fallen wadding tester for Surgical textiles and nonwovens
The tester is used to evaluate the fallen wadding test of non-woven fabrics under dry conditions, and is mainly applicable to the evaluation of the shedding performance of raw material non-woven fabrics and other textile materials used for medical protection (surgical orders, surgical gowns, clean clothes, etc.).
1. Test philosophy: The sample is subjected to the combined action of torsion and compression in the test chamber. Air is drawn from the test chamber during this twisting process, and the test result is evaluated by counting and classifying the particles in the air with a laser dust
particle counter.
2. This instrument has high-resolution large-size color touch screen and it is easy to operate and convenient to use. At the same time, it can simultaneously monitor the number of particles in 8 particle size channels and their changes, and store up to 10×500 groups of data. It is typically used in particulate matter testing, air particle research, indoor air quality assessment in clean houses, as well as in filter performance testing and cleanliness evaluation
Standards compliant
YY/T 5056.6 Surgical sheets, surgical gowns and cleansing suits for patients, medical staff and equipment - Part 4: Dry fallen wadding test method;
ISO 9073.10 Test method for textiles and nonwovens - Part 10: lint and other granules produced in a dry state;
EN Surgical covers, long coats and non-contaminated suits for patients, medical staff and medical equipment, part 2: test methods
Technical Parameters:
Control mode: smart touch;
Control mode: smart touch;
Test speed: 60 times / minute;
Rotation angle: 180 degrees / per time;
(clockwise, counterclockwise alternate);
Diameter of disk:Φ82.8㎜;
Starting distance: (between two discs);
Stroke of moving plate: straight line);
Maximum sample concentration allowed: 35,000 / L;
Particle size channel: :0.3、0.5、0.7、1.0、2.0、5.0、7.0、10.0 µm (eight);
Air sampling flflow: 28.3L/min;
Minimum measurable particle size: 0.3μm;
Interval time: 1s ~ 10s 10 options available;
Weight:55kg;
Power supply:220V 50Hz;
Dimension:85cm×60cm×90cm;
Sampling time (ie sampling amount): 20 kindsfrom 0.5min to 10min.Optional sampling time(ie: 14.15L,28.3L 283L a total of 20sampling quantities are available);
在线联系供应商
Other supplier products
Low Temperature Chrysler Fold Tester | Cold Fold Tester ---Chrysler Standards:LP-463-KB-28-01 Method A Applications: This Cold Fold Tester is applied to the cold fold test based on Chrys... | |
Fiber thermal shrinkage tester | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi Portuguese Catalan Hmong Daw Romanian ... | |
astm d3786 hydraulic bursting strength tester | Digital bursting strength tester is used for the detection of woven, knitted, non-woven fabrics, paper or board about the bursting strength and hei... | |
Multi-Functional Scratch Tester | Introductionscratches, plastic scraper three kinds of automotive industry common test methods into one.It is suitable for a variety of automotive i... | |
Flame Resistance Chamber Burning Tester For Full Face Masks | Introduction: The flame-retardant tester of medical mask is used to test the flame-retardant performance of the mask when it is accidentally contac... |
Same products
RF4系列三目立体显微镜摇臂支架 | 卖方: 深圳维客修有限公司 | RF4 RF-FX23A RF-FX35A 7-50X连续变倍三目显微镜带折叠自由摆臂支架。RF4 RF-FX35A 7-50X三目立体显微镜带370mm摆动支架和RF-P016大硅胶焊盘,用于... | |
RELIFE RL-M6T Pro B11 6.5X-65X Trinocular Stereo Microscope | 卖方: Phonefix | RELIFE RL-M6T Pro-B11 6.5X-65X Continuous Zoom Trinocular Stereo Microscope with B11 large area b... | |
Smoke Toxicity Tester | 卖方: 千实精密机电仪器检测设备有限公司 | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... | |
Surface Flammability Tester | 卖方: 千实精密机电仪器检测设备有限公司 | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... | |
Smoke Alarm Test Tunnels | 卖方: 千实精密机电仪器检测设备有限公司 | TRANSLATE with x English Arabic Hebrew Polish Bulgarian Hindi ... |