medical protective mask face mask flame retardant property tester
Medical mouth mask flame retardant property tester
Standard: GB 19083-2010 medical protective mask technical requirements
Scope:
It is the special test equipment mainly used for testing medical masks flame retardant properties.
Instrument Description:
The device is a mask with a head mold at a certain line speed after contact with the flame, then test the burning performance on masks.
Main feature:
1, PLC + touch screen control system; make test more convenient operating, visualization;
2, mask fixture for the metal body head mold, can fully simulate the actual use of the state mask.
3, the burner height can be adjustable
4, automatic timing positioning made by the burner
5, burning time, fire-retardant time are automatically recorded, show the figures.
6, with a flame temperature measurement probe, flame temperature display.
7, automatic control system, automatic ignition;
8, the burner with propane (liquefied gas) and other combustible gas interface.
9, automatic timing, automatic storage of test data; easy access to experimental reports
Specifications:
1, head mold automatic movement line with the speed of (60 ± 5) mm / s
2, the height of the flame can be adjusted to 40 ± 4mm
3, with a flame temperature measurement detection thermocouple
4, the flame from the top of the burner height is(20 ± 2) mm, the temperature is (800 ± 50) ℃
5. The distance between the top of the burner and the lowest point of the mask is (20 ± 2) mm
6, the burner height adjustment range of 30mm
7, metal head mold wall thickness of 2 ~ 3mm, resistant to flame burning
8, continued burning time and smoldering time timer: 0 ~ 9999.9 seconds, accuracy: ± 0.1 seconds
9, the power supply: AC220V, 50Hz, 50W
10, Weight: about 30kg
Other supplier products
|
|
Hexapod Tumbler Tester |
Hexapod Tumbler Tester
Applications：
The Hexapod Tumbler Tester is a popular apparatus used in the evaluation of the appearance retention of ... |
|
|
astm d3786 pneumatic bursting strength tester |
Pneumatic Bursting Strength Tester for Textile is used for the detection of woven, knitted, non-woven fabrics, paper or board about the bursting st... |
|
|
ICI pilling and snagging tester |
ICI pilling and snagging tester
Standards:
BS 5811/8479, IWSTM 152, NEXT 19, M&S P18/P18A/P18B/P21A, GB/T 4802.3, BS EN ISO
Applications:
A... |
|
|
Chrysler LP-463LB low-temperature Bending Test Machine |
The Chrysler Flex Fold Tester was designed for the determination of the mechanical stability of anchorage of the coating materials to the backing f... |
|
|
ISO 5470 taber type abrasion and wear test instrument |
Taber Abrasion Tester, which often referred to as “Taber Abraser” or “Taber Abrasion Machine”, is a testing machine to test... |
供应产品
Same products
