.

Medical Face Mask Fire Resistance Test machine

This Medical Face Mask Fire Resistance Tester is mainly used to test the flame retardant performance of medical masks. The combustion performance of the mask is measured through a head mold wearing a mask de-vice to contact with the flame at a certain linear speed.

The device is mainly used in the field of medical protection, and also can also be used for
testing flame retardant properties of other textile coating materials.

GB 19083-2010 Technical requirements of
medical protective masks
YY 0469-2011 Technical requirements of
medical surgical masks-Blood penetration
test device
GB 2626-2006 Respiratory protective products, Self - priming filtering particulates respirator-flammability
BS EN136-1998 Respiratory protective de-
vices -Full face masks - Requirements testing, marking

Items Parameters
Linear velocity of head automatic movement (60±5)mm/s
Flame height 40±4mm
Flame temperature measurement Thermocouple detection
Burner height adjustment range 30mm
Metal head mold surface thickness 2~3mm,Resistance to flame combustion
Combustion timer 0~9999.9s
Accuracy ±0.1s
Power supply AC220V,50Hz,500W
Weight About 30kg
When the flame is (20±2)mm above the burner, the temperature is (800±50)℃.
distance between the top of the burner and mask lowest point is(20±2)mm.



在线联系供应商

至: 千实精密机电仪器检测设备有限公司
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Bacterial filtration efficiency Tester of face mask
Bacterial filtration efficiency Tester of face mask Face Masks bacterial filtration efficiency BFE tester is to determine the bacterial filtration efficiency (BFE) of medical face mask materials by e...
N95 Face Mask Material Meltblown Nonwoven Fabric Particle Filtration Efficiency (PFE) Tester
N95 Face Mask Material Meltblown Nonwoven Fabric Particle Filtration Efficiency (PFE) Tester N95 Face Mask Material Meltblown Nonwoven Fabric Particle Filtration Efficiency (PFE) Tester is applicable to the performance verification of new ...
Hydrostatic Head Tester
Hydrostatic Head Tester Hydrostatic Head Tester is designed to determine the waterproof property of outdoor wears, umbrella, and waterproof fabric. It is also used to test...
Fabric water vapour permeability testing apparatus
Fabric water vapour permeability testing apparatus Fabric water vapour permeability testing apparatus is for assessment of the water vapour permeability ability of fabrics by moisture permeable cup ...
Cone Calorimeter
Cone Calorimeter A cone calorimeter is a fire test tool that is based on the amount of heat released during the combustion process directly related to the oxygen co...
供应产品

Same products

HTT-02 Hot Tack Tester
HTT-02 Hot Tack Tester 卖方: Cell Instruments Co., Ltd The HTT-02 Hot Tack Testeris specifically designed to assess this property by measuring the stren...
SPC-01 Stretch Film Peeling Cling Tester
SPC-01 Stretch Film Peeling Cling Tester 卖方: Cell Instruments Co., Ltd The SPC-01 Stretch Film Peeling Cling Testermeasures the adhesion between two layers of stretch f...
FTT-01 Film Thickness Tester
FTT-01 Film Thickness Tester 卖方: Cell Instruments Co., Ltd The FTT-01 FilmThickness Testerutilizes a mechanical scanning technique to measure the thickness ...
TST-01 Tensile Tester
TST-01 Tensile Tester 卖方: Cell Instruments Co., Ltd TST-01 tensile testers are suitable for conducting a variety of tests, including tensile strength...
HST-01 Heat Seal Tester
HST-01 Heat Seal Tester 卖方: Cell Instruments Co., Ltd HST-01 HeatSeal Testeris designed for laboratory use, to assess the heat seal ability of surfaces...