Hot Cold Climate Humidity Test Chamber for Test Camera Telescope LCD Display
Hot Cold Climate Humidity Test Chamber for test camera telescope LCD Display
Warm cold climate test chamber is mainly and widely used for various types of testing such as prototype evaluation, research & development testing, production quality control testing, accelerated stress testing, reliability testing, failure analysis, and any other application where environmental simulation is needed.
Climate test chamber features:
1. Programmable Controller with RS232C, 7 LCD touch panel control
2. Stainess steel Interior, galvanized steel sheet exterior
3.2PCS stainless steel loading shelves free
4. Multipane viewing window with heater
5.60mm diameter feed-through port
6. Floor stand with castors
| Specification | ||||||||
| Model | YICT-225 | |||||||
| Internal Dim.W×H×D(mm) | 500×750×600 | |||||||
| Temperature Range | -70ºC-- -150ºC(KS); -40ºC-- -150ºC(KL);+20ºC-- -150ºC(KR) | |||||||
| Rapid Changes Temp.Range | -70ºC;-50ºC-- +85ºC(KS),-40ºC; -20ºC-- +85ºC(KL),-20ºC; 0ºC-- +85ºC(KR) | |||||||
| Heating & cooling rate | 3ºC/min,5ºC/min,8ºC/min,10ºC/min,15ºC/min | |||||||
| Ferformance | Temp.Constancy | ±2.0ºC | ||||||
| Temp.Constancy | ±1.5ºC | |||||||
| Indication Resolution | 0.01ºC | |||||||
| Heat-up Time | -70ºC-- -150ºC in 60min; -40ºC-- -150ºC in 50min; +20ºC-- -150ºC in 35min | |||||||
| Pull-down Time | +20ºC-- -70ºC in 70min; +20ºC-- -40ºC in 55min; +20ºC-- -20ºC in 35min | |||||||
| Material | Exterior | Stainless steel piate+powder Coated | ||||||
| Interior | SUS#304 stainless steel piate | |||||||
| Insulation | PU & Fiberglass wool | |||||||
| Systems | Cirulation | Siroco fan | ||||||
| Heating | Heater;stainless-gang Fin-type heat pipe heat pipe heating mode of air circulation | |||||||
| Cooling | Airtight compressor+vaporator fins+air-cooling condenser | |||||||
| Other Components | Vacuum glass inspection window, cable port(ø 60mm),control status indicator lights,chamber lamp, experiment separation shelves(freely adjustable 2pcs) |
|||||||
| Sevey Devices | No fuse overload protection, the compressor overheating,over-current, over-pressure,dry heat, inside the over-temperature warning system |
|||||||
| Power Source[K.W.] | AC 3Ψ 380V 60/50Hz | |||||||
In addition to Warm cold climate test chamber, we also produce:
Programmable Temperature Humidity Tester; Temperature Humidity Testing Machine; Enviromental Testing Machine; High Low Temperature Tester; Temperature Humidity Test Chamber; Temperature Humidity Chamber; Environmental Test Chamber; Temperature Humidity Testing Equipment; Climatic Test Chamber; Climatic Control Chamber; Is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity endurance, suitable for quality control of the industries of electron, electrical equipment, vehicle, metal, foodstuffs, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
在线联系供应商
Other supplier products
 |
Walk-in Heating Cooling Temperature Humidity Test Chamber Room Test Machine | Walk-in Heating Cooling Temperature Humidity Test Chamber Room for test car truckWalk-in Temperature Humidity Test ChamberApplication:Walk-in whole... |
 |
Desktop Constant Temperature Humidity Storage Test chamber | Desktop constant temperature and humidity storage cabinet(YCT-080)Introduction&Application:Desktop constant temperature and humidity storage ca... |
 |
Overseas Installation and Debugging Available Environmental Test Chambers for Test Car Computer Cell Phone | Overseas installation and debugging available environmental test chambers1.Walk in climate chamberApplication:Used to do accelerated temperature an... |
 |
Class 100 clean chamber high temperature environment for the test samples | Class 100 clean safe high temperature resistance chamber(YPO-270)Introduction&Application:Class 100 clean safe high temperature resistance c... |
 |
Salt Fog Tester Lab Test Machine Salt Spray Corrosion Test Chamber Manufacturer | Salt Fog Tester Lab Test Machine Salt Spray Corrosion Test Chamber Manufacturer 1 salt: 6.5-7.22 internal material: PVC & PP3 With touch screen... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
