protective clothing pressure resistance synthetic blood penetration tester
This protective clothing pressure resistance synthetic blood penetration tester is used to determine the resistance of a protective clothing material to penetration by synthetic blood.
Standards:
ASTM F903, ASTM F1670, ASTM F1671/F1671M , YY/T0700, GB19082, ISO16603, ISO 16604, IS 16545, IS 16546
Specifications:
Pressure range: (05~ 25) kPa
Test area: 28.26cm?
Specimen size: 75 * 75 mm
Power: 220 V, 50 Hz, 50 W
Weight: 30 Kg
Dimensions: 560 * 460 * 480 mm (L x W x H)
Packaging info.: 720 * 620 * 730 mm (L x W x H), 57 Kg
Feature:
1.With one or four working position, can test one or four specimen simultaneously.
2.Single-chip microcomputer automatic control, automatic timing, automatic alarming once test finished.
3.Protective clothing blood penetration tester with mechanical pressure meter, easy for checking.
4.With HMI configuration, real-time display of pressurized pressure by touch screen.
5.Each working position is equipped with independent pressure monitored display.
6.Adopt with programmable throttle valve for pressure apply, to make sure the rate of pressurized is not excess 3.5kPa/s.
7.Medical protective clothing blood penetration testing machine using 13.6N.m ratchet wrench for specimen installation, torque force is controllable.
Working principle:
Under constant pressure, the synthetic blood was tested on the protective clothing material, and the penetration of blood was synthesized on the visual inspection material.
Qinsun Instruments Co., LTD was founded in 2010, comprised of many experienced engineers and designers standing in the forefront of the industry. Qinsun specialize in the research and development of high quality lab instrument for textile testing industry. Our head office in Shanghai and we provide high quality testing instrument and comprehensive service for textile factory, academic research institute and textile lab worldwide.
在线联系供应商
Other supplier products
 |
EN 136 Full Face Masks Flame Resistance Tester | The EN 136 Full Face Masks Flame Resistance Tester is a mask with a head mold at a certain line speed after contact with the flame, then test the b... |
 |
Qinsun Auto Air Permeability Test Apparatus for Fabric | The Air Permeability Tester accurately and swiftly determines the resistance of fabrics (woven, knitted and nonwoven textile) to the passage of air... |
 |
Mask synthetic blood penetration tester | This Mask synthetic blood penetration tester is used to measure the water permeability of various fabrics that have undergone waterproof treatment,... |
 |
Exchange pressure difference tester for Medical face mask | According to relevant standards, Exchange pressure difference tester for Medical face mask is mainly used for pressure difference test of masks and... |
 |
Full Face Masks Flame Resistance Tester | Full Face Masks Flame Resistance Tester is used for testing the flame retardant performance of afterflame, afterglow and carbonization of all faric... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
