burning tester for Medical mask
burning tester for Medical mask is used to test the flammability of medical masks, to ensure the safety of masks to wear in.
Standards:
GB 19083-2010, EN 149, GB 2626, YY 0469
Specifications:
1, head mold automatic movement line with the speed of (60 ± 5) mm / s
2, the height of the flame can be adjusted to 40 ± 4mm
3, with a flame temperature measurement detection thermocouple
4, the flame from the top of the burner height is(20 ± 2) mm, the temperature is (800 ± 50) ℃
5. The distance between the top of the burner and the lowest point of the mask is (20 ± 2) mm
6, the burner height adjustment range of 30mm
7, metal head mold wall thickness of 2 ~ 3mm, resistant to flame burning
8, continued burning time and smoldering time timer: 0 ~ 9999.9 seconds, accuracy: ± 0.1 seconds
9, the power supply: AC220V, 50Hz, 50W
10, Weight: about 30kg
Equipment Features
1). The flame temperature can be adjusted.
2). Digital display of flame temperature.
3). Automatically move to detect.
The burning tester for Medical mask ignites the specimen automatically, and ignition time is programmable; after-flame time and afterglow time are timed
automatically and shown on the display. The user-friendly design of the control panel, Touch screen is equipped to make the operation conveniently, the test results are displayed on the screen after the vertical flammability test.
Qinsun Instruments Co., LTD was founded in 2010, comprised of many experienced engineers and designers standing in the forefront of the industry. Qinsun specialize in the research and development of high quality lab instrument for textile testing industry. Our head office in Shanghai and we provide high quality testing instrument and comprehensive service for textile factory, academic research institute and textile lab worldwide.
Welcome to Contact us!
E-mail:
Whatsapp/
在线联系供应商
Other supplier products
 |
Flame-retardant medical mask tester | Flame-retardant medical mask tester is used for testing the anti-combustion performance of surgical Non-woven mask. Standards: GB 19083-2010, EN 1... |
 |
particle filtration efficiency tester | The mask testing machine (pfe) tester, medical face mask particle filtering efficiency tester(pfe) test machine and medical face mask particle filt... |
 |
Medical Face Mask flammability Test machine | This Medical Face Mask flammability Tester is mainly used to test the flame retardant performance of medical masks. The combustion performance of t... |
 |
Synthetic Blood Penetration Tester | Medical mask synthetic blood penetration tester is to determine the resistance of protective masks to the penetration of synthetic blood under diff... |
 |
Medical Face Mask Air Exchange Pressure Difference Tester | Medical Face Mask Air Exchange Pressure Difference Tester G289 meets the standard requirements, which is YY0469-2004 "Medical surgical mask technic... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
